Get Marketing Insights First
Subscribe to receive actionable strategies, growth tips, and industry insights delivered straight to your inbox.
IIM-42352
wide-bandwidth low-noise industrial accelerometer for vibration monitoring
Specifications
Key details
| Part Number | IIM-42352 |
|---|---|
| Manufacturer | TDK InvenSense |
| Category | Industrial Accelerometer |
| Lifecycle Status | Production |
| Series | SmartIndustrial |
| Package / Case | 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm |
| Pin Count | 14 |
| Operating Temperature | -40°C to +105°C |
| Last Verified | 2026-07-22 |
Overview
Part information
IIM-42352 Overview
IIM-42352 is a TDK InvenSense wide-bandwidth low-noise industrial accelerometer for vibration monitoring supplied in 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Sensor Axes | 3-axis accelerometer |
|---|---|
| Accelerometer Range | up to ±65 g selectable ranges |
| Interfaces | I3C, I²C and SPI |
| Supply Voltage | 1.71 V to 3.6 V |
| Key Feature | Flat frequency response with output data rate up to 32 kHz |
Package and Ordering Notes
The listed package is 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm with 14 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by TDK InvenSense as Production at the verification date.
Sourcing Guidance
Confirm current factory lead time, packing format and revision for IIM-42352 before placing the order.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against TDK InvenSense documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
IIM-42352 FAQ
What is IIM-42352?
IIM-42352 is a TDK InvenSense wide-bandwidth low-noise industrial accelerometer for vibration monitoring. It belongs to the SmartIndustrial series.
What are the key specifications of IIM-42352?
Sensor Axes is 3-axis accelerometer, and Accelerometer Range is up to ±65 g selectable ranges. Use the linked manufacturer datasheet for limits, test conditions and revision-controlled values.
What package does IIM-42352 use?
IIM-42352 is supplied in 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm with 14 pins, leads, lands or contacts. Verify the exact footprint and ordering suffix before PCB release.
Is IIM-42352 still in production?
IIM-42352 was listed as Production when verified on 2026-07-22. Confirm the current factory status, revision and lead time before placing an order.
What should be checked before sourcing IIM-42352?
Confirm the complete MPN, electrical ratings, package, temperature grade, packing format and required quantity. Do not treat a similar family code as a drop-in replacement without checking the datasheet.
Sourcing notes
Lifecycle and sourcing review
Production
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Confirm current factory lead time, packing format and revision for IIM-42352 before placing the order.