TLE7209-2R
protected full H-bridge driver for DC and stepper motors with SPI diagnostics
Key details
| Part Number | TLE7209-2R |
|---|---|
| Manufacturer | Infineon Technologies |
| Category | H-Bridge Motor Driver |
| Lifecycle Status | NRND |
| Series | MOTIX TLE7209 |
| Package / Case | 20-pin PG-DSO-20 power package |
| Pin Count | 20 |
| Operating Temperature | -40 C to +150 C |
| Last Verified | 2026-07-24 |
Part information
TLE7209-2R Overview
TLE7209-2R is a Infineon Technologies protected full H-bridge driver for DC and stepper motors with SPI diagnostics supplied in 20-pin PG-DSO-20 power package. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Topology | Full H-bridge |
|---|---|
| Supply Range | 5 V to 28 V |
| Continuous Load Current | 5 A at TC below 100 C |
| Current Limit | 6.6 A typical |
| Diagnostics | SPI or status flag |
Package and Ordering Notes
The listed package is 20-pin PG-DSO-20 power package with 20 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as NRND; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
TLE7209-2R is not recommended for new designs. Confirm support for the existing program and qualify a current alternative for new designs.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Infineon Technologies documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
TLE7209-2R FAQ
What is TLE7209-2R?
TLE7209-2R is a Infineon Technologies protected full H-bridge driver for DC and stepper motors with SPI diagnostics. It belongs to the MOTIX TLE7209 series.
What are the key specifications of TLE7209-2R?
Topology is Full H-bridge, and Supply Range is 5 V to 28 V. Refer to the manufacturer datasheet for limits, test conditions and revision-controlled values.
What package does TLE7209-2R use?
TLE7209-2R is supplied in 20-pin PG-DSO-20 power package with 20 pins, leads, balls or contacts. Verify the exact footprint and ordering suffix before PCB release.
Is TLE7209-2R still in production?
TLE7209-2R is not recommended for new designs. It may remain available for existing programs, but a current-generation alternative should be qualified for new designs.
What should be checked before sourcing TLE7209-2R?
Confirm the complete MPN, electrical ratings, package, temperature grade, packing format and required quantity. Do not treat a similar family code as a drop-in replacement without checking the datasheet.
Lifecycle and sourcing review
This part may not be recommended for new designs. Confirm package, electrical requirements, firmware behavior and qualification needs before selecting an alternative.
TLE7209-2R is not recommended for new designs. Confirm support for the existing program and qualify a current alternative for new designs.