TQP7M9102

TQP7M9102 Overview

TQP7M9102 is a Qorvo 400 MHz to 5 GHz high-linearity RF amplifier for wireless infrastructure supplied in 3-lead SOT-89. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Package and Ordering Notes

The listed package is 3-lead SOT-89 with 3 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.

Sourcing Guidance

TQP7M9102 is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Qorvo documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

TQP7M9102 FAQ

How TQP7M9102 differs from related orderable parts

TQP7M9102 belongs to the TQP7M91 driver amplifier family. Compared with TQP7M9103, the recorded differences include functional description: 400 MHz to 5 GHz high-linearity RF amplifier for wireless infrastructure versus 400 MHz to 4 GHz high-linearity RF amplifier for wireless infrastructure; Frequency Range: 400 MHz to 5 GHz rather than 400 MHz to 4 GHz; Gain: 17.8 dB at 2.14 GHz, a higher recorded value than 16.5 dB at 2.14 GHz; Output P1dB: 27.5 dBm, a lower recorded value than 29.5 dBm; and Output IP3: 44 dBm, a lower recorded value than 45 dBm. A shared family name does not establish pin, firmware or qualification compatibility.

For an RFQ or AVL review, quote the complete TQP7M9102 code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.

Exact order-code identity for TQP7M9102

For BOM, label, AVL and RFQ matching, preserve these visible code segments: opening alphabetic sequence TQP; middle numeric sequence seven; middle alphabetic sequence M; and terminal numeric sequence nine one zero two. The nearest published comparison codes are TQP7M9103; TQP7M9105; and TQP3M9008. Compare every segment because a changed character can identify a different density, voltage, package, temperature, qualification or packing option.

Do not shorten the requested code to TQP7M91 driver amplifier or remove its terminal characters. Ask the supplier to reproduce the complete code on the quotation and provide label or traceability evidence when exact suffix matching is mandatory.