TL081CP
1 jfet-input operational amplifier for general-purpose analog signal conditioning
Key details
| Part Number | TL081CP |
|---|---|
| Manufacturer | Texas Instruments |
| Category | Operational Amplifier |
| Lifecycle Status | Production |
| Series | TL081 |
| Package / Case | 8-pin PDIP (P), tube |
| Pin Count | 8 |
| Operating Temperature | 0°C to +70°C |
| Last Verified | 2026-07-26 |
Part information
TL081CP Overview
TL081CP is a Texas Instruments 1 jfet-input operational amplifier for general-purpose analog signal conditioning supplied in 8-pin PDIP (P), tube. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Amplifier Channels | 1 |
|---|---|
| Total Supply Voltage | Up to 30 V total for this orderable device |
| Gain-Bandwidth Product | 3 MHz typical |
| Slew Rate | 13 V/µs typical |
| Input Offset Voltage | See grade limits in datasheet |
Package and Ordering Notes
The listed package is 8-pin PDIP (P), tube with 8 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Texas Instruments as Production at the verification date.
Sourcing Guidance
Confirm the exact TI orderable code, package carrier, temperature grade, date-code requirement and current lead time for TL081CP.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Texas Instruments documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
TL081CP FAQ
What is TL081CP?
TL081CP is a Texas Instruments 1 jfet-input operational amplifier for general-purpose analog signal conditioning. It belongs to the TL081 family.
What are the key specifications of TL081CP?
Amplifier Channels is 1, while Total Supply Voltage is Up to 30 V total for this orderable device. Refer to the TI datasheet for limits and test conditions.
What package does TL081CP use?
TL081CP is supplied in 8-pin PDIP (P), tube with 8 pins. Verify the TI package designator and footprint before PCB release.
Is TL081CP still in production?
TL081CP was listed by Texas Instruments as ACTIVE when verified on 2026-07-26. Confirm the current factory status, lead time and packing format before ordering.
What should be checked before sourcing TL081CP?
Confirm the full MPN, channel count, supply range, temperature grade, package and packing format. TL081H for a newer-generation design after full electrical verification may be considered, but offset, bandwidth, input range, output swing and stability must be checked.
How TL081CP differs from related orderable parts
TL081CP belongs to the TL081 family. Compared with TL082CP, the recorded differences include functional description: 1 jfet-input operational amplifier for general-purpose analog signal conditioning versus 2 jfet-input operational amplifier for general-purpose analog signal conditioning and Amplifier Channels: 1, a lower recorded value than 2. A shared family name does not establish pin, firmware or qualification compatibility.
| Part number | Recorded function | Package | Pins / contacts | Temperature | Lifecycle |
|---|---|---|---|---|---|
| TL081CP | 1 jfet-input operational amplifier for general-purpose analog signal conditioning | 8-pin PDIP (P), tube | 8 pins, leads or contacts | 0°C to +70°C | Production |
| TL082CP | 2 jfet-input operational amplifier for general-purpose analog signal conditioning | 8-pin PDIP (P), tube | 8 pins, leads or contacts | 0°C to +70°C | Production |
| TL082IDR | 2 jfet-input operational amplifier for general-purpose analog signal conditioning | 8-pin SOIC (D), tape and reel | 8 pins, leads or contacts | -40°C to +85°C | Production |
| TL084BCDR | 4 jfet-input operational amplifier for general-purpose analog signal conditioning | 14-pin SOIC (D), tape and reel | 14 pins, leads or contacts | 0°C to +70°C | Production |
For an RFQ or AVL review, quote the complete TL081CP code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Confirm the exact TI orderable code, package carrier, temperature grade, date-code requirement and current lead time for TL081CP.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.