MP23DB01HPTR
bottom-port omnidirectional digital MEMS microphone with multiple performance modes
Key details
| Part Number | MP23DB01HPTR |
|---|---|
| Manufacturer | STMicroelectronics |
| Category | Digital MEMS Microphone |
| Lifecycle Status | Production |
| Series | MP23DB01HP |
| Package / Case | 5-lead RHLGA, 3.5 mm x 2.65 mm x 0.98 mm, tape and reel |
| Pin Count | 5 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-30 |
Part information
MP23DB01HPTR Overview
MP23DB01HPTR is a STMicroelectronics bottom-port omnidirectional digital MEMS microphone with multiple performance modes supplied in 5-lead RHLGA, 3.5 mm x 2.65 mm x 0.98 mm, tape and reel. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | MP23DB01HPTR |
|---|---|
| Output Interface | PDM digital output |
| Sensitivity | -41 dBFS ±1 dB |
| Signal-to-Noise Ratio | 66.5 dB typical |
| Acoustic Overload Point | 135 dBSPL |
| Current Consumption | 2 µA sleep, 285 µA low-power, 800 µA performance mode |
Package and Ordering Notes
The listed package is 5-lead RHLGA, 3.5 mm x 2.65 mm x 0.98 mm, tape and reel with 5 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by STMicroelectronics as Production at the verification date.
Sourcing Guidance
MP23DB01HPTR is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against STMicroelectronics documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
MP23DB01HPTR FAQ
What is MP23DB01HPTR?
MP23DB01HPTR is a STMicroelectronics bottom-port omnidirectional digital MEMS microphone with multiple performance modes. The verified manufacturer ordering code is MP23DB01HPTR.
What are the key specifications of MP23DB01HPTR?
Verified Ordering Code is MP23DB01HPTR, while Output Interface is PDM digital output. Use the linked manufacturer datasheet for revision-controlled limits and test conditions.
What package does MP23DB01HPTR use?
MP23DB01HPTR is supplied in 5-lead RHLGA, 3.5 mm x 2.65 mm x 0.98 mm, tape and reel with 5 pins, leads, lands or contacts. Verify the manufacturer land pattern, port orientation, and packing format before PCB or procurement approval.
What is the lifecycle status of MP23DB01HPTR?
MP23DB01HPTR is listed by the manufacturer as an active production device as checked on 2026-07-30. Confirm factory support, last-order constraints, and availability for the exact order code before placing an order.
What should be checked before sourcing MP23DB01HPTR?
Quote MP23DB01HPTR exactly and confirm package, packing format, device marking, date code, traceability, lifecycle status, and the controlling datasheet revision. Do not substitute a related family code without an independent electrical and mechanical review.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
MP23DB01HPTR is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.