MPX4250AP
signal-conditioned absolute manifold pressure sensor for 20 kPa to 250 kPa measurement
Key details
| Part Number | MPX4250AP |
|---|---|
| Manufacturer | NXP Semiconductors |
| Category | Pressure Sensor |
| Lifecycle Status | Obsolete |
| Series | MPX4250A |
| Package / Case | 6-lead single-port SENSOR6F unibody package, tray |
| Pin Count | 6 |
| Operating Temperature | -40°C to +125°C |
| Last Verified | 2026-07-30 |
Part information
MPX4250AP Overview
MPX4250AP is a NXP Semiconductors signal-conditioned absolute manifold pressure sensor for 20 kPa to 250 kPa measurement supplied in 6-lead single-port SENSOR6F unibody package, tray. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | MPX4250AP |
|---|---|
| Pressure Type | Absolute manifold pressure |
| Pressure Range | 20 kPa to 250 kPa |
| Output Type | Signal-conditioned analog voltage |
| Supply Voltage | 5.1 V nominal |
| Maximum Error | 1.5% over 0°C to +85°C |
Package and Ordering Notes
The listed package is 6-lead single-port SENSOR6F unibody package, tray with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
MPX4250AP is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against NXP Semiconductors documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
MPX4250AP FAQ
What is MPX4250AP?
MPX4250AP is a NXP Semiconductors signal-conditioned absolute manifold pressure sensor for 20 kPa to 250 kPa measurement. The verified manufacturer ordering code is MPX4250AP.
What are the key specifications of MPX4250AP?
Verified Ordering Code is MPX4250AP, while Pressure Type is Absolute manifold pressure. Use the linked manufacturer datasheet for revision-controlled limits and test conditions.
What package does MPX4250AP use?
MPX4250AP is supplied in 6-lead single-port SENSOR6F unibody package, tray with 6 pins, leads, lands or contacts. Verify the manufacturer land pattern, port orientation, and packing format before PCB or procurement approval.
What is the lifecycle status of MPX4250AP?
MPX4250AP is listed by the manufacturer as obsolete, end of life, or no longer manufactured as checked on 2026-07-30. Confirm factory support, last-order constraints, and availability for the exact order code before placing an order.
What should be checked before sourcing MPX4250AP?
Quote MPX4250AP exactly and confirm package, packing format, device marking, date code, traceability, lifecycle status, and the controlling datasheet revision. Do not substitute a related family code without an independent electrical and mechanical review.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
MPX4250AP is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.