SN65HVD230D
3.3 V high-speed CAN transceiver with standby and slope-control modes
Key details
| Part Number | SN65HVD230D |
|---|---|
| Manufacturer | Texas Instruments |
| Category | CAN Transceiver |
| Lifecycle Status | Obsolete |
| Series | SN65HVD23x |
| Package / Case | 8-pin SOIC (D), 75-piece tube |
| Pin Count | 8 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-08-04 |
Part information
SN65HVD230D Overview
SN65HVD230D is a Texas Instruments 3.3 V high-speed CAN transceiver with standby and slope-control modes supplied in 8-pin SOIC (D), 75-piece tube. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | SN65HVD230D |
|---|---|
| Supply Voltage | 3.0 V to 3.6 V |
| Maximum Data Rate | 1 Mbps |
| Standard | ISO 11898-2 high-speed CAN |
| Bus-Pin ESD Protection | greater than ±16 kV HBM |
| Typical Standby Current | 370 µA |
Package and Ordering Notes
The listed package is 8-pin SOIC (D), 75-piece tube with 8 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
SN65HVD230D is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Texas Instruments documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
Related Product Resources
Browse the Texas Instruments product archive or the CAN Transceiver category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.
SN65HVD230D FAQ
What is SN65HVD230D?
SN65HVD230D is a Texas Instruments 3.3 V high-speed CAN transceiver with standby and slope-control modes. The verified manufacturer ordering code is SN65HVD230D.
What are the key specifications of SN65HVD230D?
Verified Ordering Code is SN65HVD230D, while Supply Voltage is 3.0 V to 3.6 V. Use the linked manufacturer datasheet for revision-controlled limits and test conditions.
What package does SN65HVD230D use?
SN65HVD230D is supplied in 8-pin SOIC (D), 75-piece tube with 8 pins, leads, lands or contacts. Verify the manufacturer drawing and packing format before PCB or procurement approval.
What is the lifecycle status of SN65HVD230D?
SN65HVD230D is listed by the manufacturer as obsolete or out of production as checked on 2026-08-04. Confirm factory support and availability for the exact order code before ordering.
What should be checked before sourcing SN65HVD230D?
Quote SN65HVD230D exactly and confirm package, packing, marking, date code, traceability, lifecycle status, and the controlling datasheet revision. Do not substitute a related family code without an independent electrical and mechanical review.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
SN65HVD230D is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.