MT40A4G4SA-062E:F reference image
Reference image 78

MT40A4G4SA-062E:F

16Gb 1.2 VOLTS DDR4 x4 memory component

Series
Micron DDR4 DRAM
Package
78-ball TFBGA, 7.50 x 11.00 x 1.20 mm
Temperature
0C to +95C
Specifications

Key details

Part NumberMT40A4G4SA-062E:F
ManufacturerMicron Technology
CategoryDDR4 SDRAM
Lifecycle StatusEnd of Life
SeriesMicron DDR4 DRAM
Package / Case78-ball TFBGA, 7.50 x 11.00 x 1.20 mm
Pin Count78
Operating Temperature0C to +95C
Last Verified2026-08-13
Overview

Part information

MT40A4G4SA-062E:F Overview

MT40A4G4SA-062E:F is a Micron Technology 16Gb 1.2 VOLTS DDR4 x4 memory component supplied in 78-ball TFBGA, 7.50 x 11.00 x 1.20 mm. This page preserves the exact displayed MPN because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Verified Ordering CodeMT40A4G4SA-062E:F
Density16Gb
TechnologyDDR4
FamilyDRAM
I/O Voltage1.2 VOLTS
Bus Widthx4
Component Configuration4Gb x4
Clock Speed1600MHz
Transfer Rate3200MTPS
CAS LatencyCL = 22
PackageTFBGA
Pin / Ball Count78-ball
Package Dimensions7.50 x 11.00 x 1.20 mm
Number of Components1
Dry Pack Quantity1260
Tape and Reel Quantity2000

Package and Ordering Notes

The listed package is 78-ball TFBGA, 7.50 x 11.00 x 1.20 mm with 78 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as End of Life; confirm current factory support and last-time-buy constraints before design-in.

Sourcing Guidance

MT40A4G4SA-062E:F is the exact Micron ordering identity. Confirm End of Life lifecycle, 0C to +95C grade, 78-ball TFBGA, 7.50 x 11.00 x 1.20 mm, packing and the linked data-sheet revision before ordering.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Documentation and Source Status

Technical values were checked against Micron Technology documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

Browse the Micron Technology product archive or the DDR4 SDRAM category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.

MT40A4G4SA-062E:F FAQ

What is MT40A4G4SA-062E:F?

MT40A4G4SA-062E:F is the exact Micron ordering code for a 16Gb DDR4 x4 memory device in the Micron DDR4 DRAM series. Identity was checked against the linked Micron part-detail record.

What are the key specifications of MT40A4G4SA-062E:F?

Micron lists 16Gb, 1.2 VOLTS, 1600MHz, 3200MTPS, and 0C to +95C for MT40A4G4SA-062E:F. Use the linked official data sheet for revision-controlled limits.

What package does MT40A4G4SA-062E:F use?

MT40A4G4SA-062E:F uses a 78-ball TFBGA package measuring 7.50 x 11.00 x 1.20 mm. Verify the official package drawing before PCB release.

What is the lifecycle status of MT40A4G4SA-062E:F?

Micron lists this exact ordering code as End of Life; it is not represented as a Production part. This was checked in Micron’s live current or official obsolete catalog on 2026-08-13; recheck factory support before design-in or procurement.

What should be checked before sourcing MT40A4G4SA-062E:F?

Quote MT40A4G4SA-062E:F exactly and verify the 0C to +95C grade, TFBGA package and 78-ball, speed grade, packing, label traceability, and controlling Micron data-sheet revision. Do not substitute a neighboring suffix without separate qualification.

Sourcing notes

Lifecycle and sourcing review

End of Life

This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.

MT40A4G4SA-062E:F is the exact Micron ordering identity. Confirm End of Life lifecycle, 0C to +95C grade, 78-ball TFBGA, 7.50 x 11.00 x 1.20 mm, packing and the linked data-sheet revision before ordering.