Component comparison · Last verified 2026-08-15
MT40A512M16LY-062E:E and MT40A512M16LY-075:E are 8Gb, 1.2V DDR4 x16 components in the same 96-ball TFBGA body, but they target different speed bins and sourcing states. The -062E code is listed at 3200MT/s and CL22 with End of Life status, while the -075 code is listed at 2666MT/s and CL19 as Obsolete.
MT40A512M16LY-062E:E vs MT40A512M16LY-075:E specifications
| Specification | MT40A512M16LY-062E:E | MT40A512M16LY-075:E |
|---|---|---|
| Verified ordering code | MT40A512M16LY-062E:E | MT40A512M16LY-075:E |
| Memory density | 8Gb | 8Gb |
| Technology | DDR4 | DDR4 |
| I/O voltage | 1.2V | 1.2V |
| Bus width | x16 | x16 |
| Component configuration | 512Mb x16 | 512Mb x16 |
| Clock speed | 1600MHz | 1333MHz |
| Transfer rate | 3200MT/s | 2666MT/s |
| CAS latency | CL22 | CL19 |
| Package and ball count | 96-ball TFBGA | 96-ball TFBGA |
| Package dimensions | 7.50 x 13.50 x 1.20 mm | 7.50 x 13.50 x 1.20 mm |
| Operating temperature | 0C to +95C | 0C to +95C |
| Micron catalog lifecycle | End of Life | Obsolete |
| Dry-pack quantity | 1,080 | 1,080 |
| Tape-and-reel quantity | 2,000 | 2,000 |
Key differences
The speed grade changes the controller timing target
Micron lists MT40A512M16LY-062E:E at a 1600MHz clock, 3200MT/s transfer rate and CL22, while MT40A512M16LY-075:E is listed at 1333MHz, 2666MT/s and CL19. Those values describe different catalog speed bins; the lower CL number on the -075 code must not be read as proof of lower absolute latency or direct interchangeability without checking the revision-controlled timing tables and the controller's supported operating point.
End of Life and Obsolete require different sourcing evidence
Micron lists the -062E ordering code as End of Life and the -075 ordering code as Obsolete. Neither should be treated as a current Production design-in solely from the comparison. Confirm factory orderability, remaining-life or last-time-buy status, date-code and lot traceability, storage history and an approved replacement path before procurement.
Can these parts be interchanged?
The two order codes share the same catalog-level 8Gb DDR4 x16, 1.2V, 512Mb x16 configuration, 96-ball TFBGA body, package dimensions, commercial temperature range and packing quantities. That overlap does not prove drop-in compatibility across speed bins. Verify the controlling data-sheet revision, exact ball assignment and land pattern, controller timing mode, supported clock and transfer rate, CAS and other timing parameters, signal integrity, power-up behavior, firmware initialization, thermal margin and current Micron orderability before qualification or substitution.
- Electrical ratings and operating conditions
- Package dimensions, footprint and pinout
- Interface, timing and firmware behavior
- Temperature and qualification grade
- Lifecycle status and current documentation revision
MT40A512M16LY-062E:E vs MT40A512M16LY-075:E FAQ
What is the main difference between MT40A512M16LY-062E:E and MT40A512M16LY-075:E?
Micron lists the -062E code at 1600MHz, 3200MT/s and CL22, while the -075 code is listed at 1333MHz, 2666MT/s and CL19. Their Micron catalog lifecycle labels also differ: End of Life versus Obsolete.
Are MT40A512M16LY-062E:E and MT40A512M16LY-075:E drop-in replacements?
Do not assume so. They share the same density, width, voltage and catalog package outline, but they are different speed grades. Review the exact timing tables, controller configuration, ball map, land pattern, power and firmware requirements before substitution.
Which part has the higher listed DDR4 transfer rate?
Micron lists MT40A512M16LY-062E:E at 3200MT/s and MT40A512M16LY-075:E at 2666MT/s. A higher speed-bin rating does not remove the need to validate every timing parameter at the intended controller operating point.
Is either ordering code listed as Production?
No. Micron lists MT40A512M16LY-062E:E as End of Life and MT40A512M16LY-075:E as Obsolete in the checked catalogs. Reconfirm live factory support and the complete ordering code before sourcing.
What must be checked before changing between the -062E and -075 speed grades?
Check the revision-controlled data sheet, supported clock and transfer rate, CAS and other timing limits, controller mode, signal integrity, package drawing and ball assignment, PCB footprint, power-up sequence, firmware setup, lifecycle, traceability and current orderability.
Sources and verification
- Micron MT40A512M16LY-062E:E exact part detail
- Micron MT40A512M16LY-075:E exact obsolete-part detail
- Micron current DDR4 SDRAM part catalog
- Micron obsolete DDR4 SDRAM part catalog
This comparison supports preliminary selection and sourcing review. Similar specifications do not establish drop-in compatibility. Confirm the complete orderable code and current manufacturer documentation before design release or purchase.
Request a component quote