AON6992
30 V dual asymmetric N-channel MOSFET half-bridge
Key details
| Part Number | AON6992 |
|---|---|
| Manufacturer | Alpha & Omega Semiconductor |
| Category | Power MOSFET |
| Lifecycle Status | Obsolete |
| Series | AON6992 |
| Package / Case | 8-lead DFN 5 mm × 6 mm |
| Pin Count | 8 |
| Operating Temperature | -55°C to +150°C junction |
| Last Verified | 2026-07-18 |
Part information
AON6992 Overview
AON6992 is a Alpha & Omega Semiconductor 30 V dual asymmetric N-channel MOSFET half-bridge supplied in 8-lead DFN 5 mm × 6 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Drain-Source Voltage | 30 V |
|---|---|
| Configuration | Dual asymmetric half-bridge |
| Polarity | Dual N-channel |
| Package Size | 5 mm × 6 mm × 0.75 mm |
| Application | Synchronous buck power stage |
Package and Ordering Notes
The listed package is 8-lead DFN 5 mm × 6 mm with 8 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
AON6992 is a legacy or obsolete orderable code. Source only with date-code, label, package and traceability checks appropriate to the application.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Alpha & Omega Semiconductor documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
AON6992 selection and design context
AON6992 is cataloged as a Power MOSFET in the AON6992 family. Its recorded function is 30 V dual asymmetric N-channel MOSFET half-bridge. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Drain-Source Voltage: 30 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
- Configuration: Dual asymmetric half-bridge. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Polarity: Dual N-channel. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Package Size: 5 mm × 6 mm × 0.75 mm. Confirm the value and its datasheet test conditions for the exact ordering suffix.
Application and qualification considerations
When evaluating this switching device, confirm voltage and current margin, gate-drive conditions, on-state loss, switching energy, thermal impedance and safe operating area. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for AON6992
The recorded package is 8-lead DFN 5 mm × 6 mm, the temperature range is -55°C to +150°C junction, and the lifecycle status is Obsolete as of 2026-07-18. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
AON6992 FAQ
What distinguishes AON6992 within the AON6992 family?
AON6992 is the exact orderable code for a 30 V dual asymmetric N-channel MOSFET half-bridge in 8-lead DFN 5 mm × 6 mm. Related AON6992 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for AON6992?
AON6992 is recorded in 8-lead DFN 5 mm × 6 mm with 8 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting AON6992?
Drain-Source Voltage is recorded as 30 V, Configuration is recorded as Dual asymmetric half-bridge. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of AON6992?
AON6992 was recorded as Obsolete when verified on 2026-07-18. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for AON6992?
Provide the complete AON6992 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
AON6992 is a legacy or obsolete orderable code. Source only with date-code, label, package and traceability checks appropriate to the application.