BHI260AP
programmable smart sensor hub with 32-bit MCU, 6-axis IMU and self-learning AI software
Key details
| Part Number | BHI260AP |
|---|---|
| Manufacturer | Bosch Sensortec |
| Category | Smart Sensor Hub |
| Lifecycle Status | Production |
| Series | BHI260AP |
| Package / Case | 44-land LGA, 3.1 mm × 3.1 mm |
| Pin Count | 44 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-18 |
Part information
BHI260AP Overview
BHI260AP is a Bosch Sensortec programmable smart sensor hub with 32-bit MCU, 6-axis IMU and self-learning AI software supplied in 44-land LGA, 3.1 mm × 3.1 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Integrated Sensors | 6-axis IMU |
|---|---|
| Processor | 32-bit programmable sensor-hub MCU |
| Nominal Operating Voltage | 1.8 V |
| Standby Current | 8 µA typ |
| AI Function | Self-learning activity recognition |
Package and Ordering Notes
The listed package is 44-land LGA, 3.1 mm × 3.1 mm with 44 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Bosch Sensortec as Production at the verification date.
Sourcing Guidance
Confirm current factory lead time, packing format and revision for BHI260AP before placing the order.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Bosch Sensortec documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
BHI260AP selection and design context
BHI260AP is cataloged as a Smart Sensor Hub in the BHI260AP family. Its recorded function is programmable smart sensor hub with 32-bit MCU, 6-axis IMU and self-learning AI software. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Integrated Sensors: 6-axis IMU. Confirm system timing margin and the test conditions attached to the published limit.
- Processor: 32-bit programmable sensor-hub MCU. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Nominal Operating Voltage: 1.8 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
- Standby Current: 8 µA typ. Check steady-state, transient and thermal margin in the intended operating mode.
Application and qualification considerations
When evaluating this sensor, confirm measurement range, sensitivity, noise, output data rate, interface voltage, calibration needs and mechanical orientation. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for BHI260AP
The recorded package is 44-land LGA, 3.1 mm × 3.1 mm, the temperature range is -40°C to +85°C, and the lifecycle status is Production as of 2026-07-18. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
BHI260AP FAQ
What distinguishes BHI260AP within the BHI260AP family?
BHI260AP is the exact orderable code for a programmable smart sensor hub with 32-bit MCU, 6-axis IMU and self-learning AI software in 44-land LGA, 3.1 mm × 3.1 mm. Related BHI260AP devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for BHI260AP?
BHI260AP is recorded in 44-land LGA, 3.1 mm × 3.1 mm with 44 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting BHI260AP?
Integrated Sensors is recorded as 6-axis IMU, Processor is recorded as 32-bit programmable sensor-hub MCU. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of BHI260AP?
BHI260AP was recorded as Production when verified on 2026-07-18. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for BHI260AP?
Provide the complete BHI260AP orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Confirm current factory lead time, packing format and revision for BHI260AP before placing the order.