CY7C68013A-128AXC

CY7C68013A-128AXC Overview

CY7C68013A-128AXC is a Infineon Technologies high-speed USB 2.0 peripheral controller with enhanced 8051 core, 16 KB RAM and external address/data bus supplied in 128-pin TQFP, Pb-free. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Package and Ordering Notes

The listed package is 128-pin TQFP, Pb-free with 128 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Infineon Technologies as Production at the verification date.

Sourcing Guidance

Confirm current factory lead time, packing format and revision for CY7C68013A-128AXC before placing the order.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Infineon Technologies documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

CY7C68013A-128AXC selection and design context

CY7C68013A-128AXC is cataloged as a USB Microcontroller in the EZ-USB FX2LP family. Its recorded function is high-speed USB 2.0 peripheral controller with enhanced 8051 core, 16 KB RAM and external address/data bus. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.

• USB Interface: USB 2.0 high-speed peripheral, 480 Mbit/s. Confirm logic levels, signaling mode, host support and required external components.
• Processor: Enhanced 8051 core. Confirm the value and its datasheet test conditions for the exact ordering suffix.
• Internal RAM: 16 KB. Confirm the value and its datasheet test conditions for the exact ordering suffix.
• Programmable I/O: 40. Confirm logic levels, signaling mode, host support and required external components.

Application and qualification considerations

When evaluating this interface device, confirm protocol revision, signaling voltage, data rate, termination, ESD protection, clocking and host-side driver requirements. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.

Procurement checks for CY7C68013A-128AXC

The recorded package is 128-pin TQFP, Pb-free, the temperature range is 0°C to +70°C, commercial, and the lifecycle status is Production as of 2026-07-19. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.

CY7C68013A-128AXC FAQ

How CY7C68013A-128AXC differs from related orderable parts

CY7C68013A-128AXC belongs to the EZ-USB FX2LP family. Compared with CY7C68013A-100AXC, the recorded differences include functional description: high-speed USB 2.0 peripheral controller with enhanced 8051 core, 16 KB RAM and external address/data bus versus high-speed USB 2.0 peripheral controller with enhanced 8051 core and 16 KB internal RAM; package: 128-pin TQFP, Pb-free versus 100-pin TQFP, Pb-free; pin/contact count: 128 pins, leads or contacts versus 100 pins, leads or contacts; and External Bus: 16-/8-bit 8051 address/data bus, a lower recorded value than Not bonded out on 100-pin version. A shared family name does not establish pin, firmware or qualification compatibility.

For an RFQ or AVL review, quote the complete CY7C68013A-128AXC code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.

Exact order-code identity for CY7C68013A-128AXC

For BOM, label, AVL and RFQ matching, preserve these visible code segments: opening alphabetic sequence CY; middle numeric sequence seven; middle alphabetic sequence C; middle numeric sequence six eight zero one three; middle alphabetic sequence A; middle numeric sequence one two eight; and terminal alphabetic sequence AXC. The nearest published comparison codes are CY7C68013A-100AXC; CY7C68013A-100AXI; and CY7C68013A-128AXI. Compare every segment because a changed character can identify a different density, voltage, package, temperature, qualification or packing option.

Do not shorten the requested code to EZ-USB FX2LP or remove its terminal characters. Ask the supplier to reproduce the complete code on the quotation and provide label or traceability evidence when exact suffix matching is mandatory.