DLP11SA900HL2L
two-line 90 Ω common-mode noise filter for high-speed differential interfaces
Key details
| Part Number | DLP11SA900HL2L |
|---|---|
| Manufacturer | Murata Manufacturing |
| Category | Common Mode Choke |
| Lifecycle Status | Obsolete |
| Series | DLP11SA |
| Package / Case | 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm |
| Pin Count | 4 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-19 |
Part information
DLP11SA900HL2L Overview
DLP11SA900HL2L is a Murata Manufacturing two-line 90 Ω common-mode noise filter for high-speed differential interfaces supplied in 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Common-Mode Impedance | 90 Ω at 100 MHz |
|---|---|
| Rated Current | 150 mA |
| Rated Voltage | 5 V DC |
| DC Resistance | 1.75 Ω max |
| Lines | 2 |
Package and Ordering Notes
The listed package is 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm with 4 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
DLP11SA900HL2L is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Murata Manufacturing documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
How DLP11SA900HL2L differs from related orderable parts
DLP11SA900HL2L belongs to the DLP11SA family. Compared with DLP11TB800UL2L, the recorded differences include functional description: two-line 90 Ω common-mode noise filter for high-speed differential interfaces versus low-profile two-line 80 Ω common-mode noise filter for high-speed differential signals; package: 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm versus 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.1 mm × 0.3 mm; Common-Mode Impedance: 90 Ω at 100 MHz, a higher recorded value than 80 Ω at 100 MHz; Rated Current: 150 mA, a higher recorded value than 100 mA; and DC Resistance: 1.75 Ω max, a higher recorded value than 1.5 Ω max. A shared family name does not establish pin, firmware or qualification compatibility.
| Part number | Recorded function | Package | Pins / contacts | Temperature | Lifecycle |
|---|---|---|---|---|---|
| DLP11SA900HL2L | two-line 90 Ω common-mode noise filter for high-speed differential interfaces | 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm | 4 pins, leads or contacts | -40°C to +85°C | Obsolete |
| DLP11TB800UL2L | low-profile two-line 80 Ω common-mode noise filter for high-speed differential signals | 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.1 mm × 0.3 mm | 4 pins, leads or contacts | -40°C to +85°C | Obsolete |
| DLP11SN900HL2L | two-line 90 Ω common-mode noise filter for USB 2.0, LVDS and other differential interfaces | 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm × 0.82 mm | 4 pins, leads or contacts | -40°C to +85°C | Obsolete |
For an RFQ or AVL review, quote the complete DLP11SA900HL2L code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.
DLP11SA900HL2L selection and design context
DLP11SA900HL2L is cataloged as a Common Mode Choke in the DLP11SA family. Its recorded function is two-line 90 Ω common-mode noise filter for high-speed differential interfaces. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Common-Mode Impedance: 90 Ω at 100 MHz. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Rated Current: 150 mA. Check steady-state, transient and thermal margin in the intended operating mode.
- Rated Voltage: 5 V DC. Check rail compatibility, tolerance and sequencing under worst-case conditions.
- DC Resistance: 1.75 Ω max. Confirm the value and its datasheet test conditions for the exact ordering suffix.
Application and qualification considerations
When evaluating this component, confirm the ratings that control system compatibility, including supply conditions, interface or signal limits, timing, thermal behavior and package constraints. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for DLP11SA900HL2L
The recorded package is 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm, the temperature range is -40°C to +85°C, and the lifecycle status is Obsolete as of 2026-07-19. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
DLP11SA900HL2L FAQ
What distinguishes DLP11SA900HL2L within the DLP11SA family?
DLP11SA900HL2L is the exact orderable code for a two-line 90 Ω common-mode noise filter for high-speed differential interfaces in 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm. Related DLP11SA devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for DLP11SA900HL2L?
DLP11SA900HL2L is recorded in 4-terminal 0504 (1210 metric) SMD, 1.25 mm × 1.0 mm with 4 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting DLP11SA900HL2L?
Common-Mode Impedance is recorded as 90 Ω at 100 MHz, Rated Current is recorded as 150 mA. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of DLP11SA900HL2L?
DLP11SA900HL2L was recorded as Obsolete when verified on 2026-07-19. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for DLP11SA900HL2L?
Provide the complete DLP11SA900HL2L orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
DLP11SA900HL2L is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.