DVIULC6-4SC6
four-line ultra-low-capacitance ESD protection array for high-speed video interfaces
Key details
| Part Number | DVIULC6-4SC6 |
|---|---|
| Manufacturer | STMicroelectronics |
| Category | ESD Protection Array |
| Lifecycle Status | Obsolete |
| Series | DVIULC6 |
| Package / Case | 6-pin SOT-23 / SOT23-6 |
| Pin Count | 6 |
| Operating Temperature | -40°C to +125°C junction |
| Last Verified | 2026-07-20 |
Part information
DVIULC6-4SC6 Overview
DVIULC6-4SC6 is a STMicroelectronics four-line ultra-low-capacitance ESD protection array for high-speed video interfaces supplied in 6-pin SOT-23 / SOT23-6. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Protected Lines | 4 |
|---|---|
| Typical Line Capacitance | 0.6 pF at 825 MHz |
| ESD Contact Rating | ±15 kV IEC 61000-4-2 |
| Working Voltage | 5 V |
| Application | DVI and high-speed video interfaces |
Package and Ordering Notes
The listed package is 6-pin SOT-23 / SOT23-6 with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
DVIULC6-4SC6 is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against STMicroelectronics documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
DVIULC6-4SC6 selection and design context
DVIULC6-4SC6 is cataloged as a ESD Protection Array in the DVIULC6 family. Its recorded function is four-line ultra-low-capacitance ESD protection array for high-speed video interfaces. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Protected Lines: 4. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Typical Line Capacitance: 0.6 pF at 825 MHz. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- ESD Contact Rating: ±15 kV IEC 61000-4-2. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Working Voltage: 5 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
Application and qualification considerations
When evaluating this protection device, confirm working voltage, clamping behavior, surge or ESD rating, capacitance, polarity and placement relative to the protected interface. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for DVIULC6-4SC6
The recorded package is 6-pin SOT-23 / SOT23-6, the temperature range is -40°C to +125°C junction, and the lifecycle status is Obsolete as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
DVIULC6-4SC6 FAQ
What distinguishes DVIULC6-4SC6 within the DVIULC6 family?
DVIULC6-4SC6 is the exact orderable code for a four-line ultra-low-capacitance ESD protection array for high-speed video interfaces in 6-pin SOT-23 / SOT23-6. Related DVIULC6 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for DVIULC6-4SC6?
DVIULC6-4SC6 is recorded in 6-pin SOT-23 / SOT23-6 with 6 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting DVIULC6-4SC6?
Protected Lines is recorded as 4, Typical Line Capacitance is recorded as 0.6 pF at 825 MHz. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of DVIULC6-4SC6?
DVIULC6-4SC6 was recorded as Obsolete when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for DVIULC6-4SC6?
Provide the complete DVIULC6-4SC6 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
DVIULC6-4SC6 is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.