ECMF02-2HSMX6
two-line common-mode filter with integrated ESD protection for USB 3.2 Gen 2 interfaces
Key details
| Part Number | ECMF02-2HSMX6 |
|---|---|
| Manufacturer | STMicroelectronics |
| Category | Common Mode Filter |
| Lifecycle Status | Obsolete |
| Series | ECMF02 |
| Package / Case | 6-lead micro-QFN, 1.5 mm × 1.7 mm |
| Pin Count | 6 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-20 |
Part information
ECMF02-2HSMX6 Overview
ECMF02-2HSMX6 is a STMicroelectronics two-line common-mode filter with integrated ESD protection for USB 3.2 Gen 2 interfaces supplied in 6-lead micro-QFN, 1.5 mm × 1.7 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Differential Lines | 1 pair |
|---|---|
| Interface | USB 3.2 Gen 2 |
| ESD Contact Rating | 8 kV IEC 61000-4-2 |
| Package Size | 1.5 mm × 1.7 mm × 0.5 mm |
| Function | Common-mode filtering and ESD protection |
Package and Ordering Notes
The listed package is 6-lead micro-QFN, 1.5 mm × 1.7 mm with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
ECMF02-2HSMX6 is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against STMicroelectronics documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
ECMF02-2HSMX6 selection and design context
ECMF02-2HSMX6 is cataloged as a Common Mode Filter in the ECMF02 family. Its recorded function is two-line common-mode filter with integrated ESD protection for USB 3.2 Gen 2 interfaces. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Differential Lines: 1 pair. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Interface: USB 3.2 Gen 2. Confirm logic levels, signaling mode, host support and required external components.
- ESD Contact Rating: 8 kV IEC 61000-4-2. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Package Size: 1.5 mm × 1.7 mm × 0.5 mm. Confirm the value and its datasheet test conditions for the exact ordering suffix.
Application and qualification considerations
When evaluating this interface device, confirm protocol revision, signaling voltage, data rate, termination, ESD protection, clocking and host-side driver requirements. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for ECMF02-2HSMX6
The recorded package is 6-lead micro-QFN, 1.5 mm × 1.7 mm, the temperature range is -40°C to +85°C, and the lifecycle status is Obsolete as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
ECMF02-2HSMX6 FAQ
What distinguishes ECMF02-2HSMX6 within the ECMF02 family?
ECMF02-2HSMX6 is the exact orderable code for a two-line common-mode filter with integrated ESD protection for USB 3.2 Gen 2 interfaces in 6-lead micro-QFN, 1.5 mm × 1.7 mm. Related ECMF02 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for ECMF02-2HSMX6?
ECMF02-2HSMX6 is recorded in 6-lead micro-QFN, 1.5 mm × 1.7 mm with 6 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting ECMF02-2HSMX6?
Differential Lines is recorded as 1 pair, Interface is recorded as USB 3.2 Gen 2. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of ECMF02-2HSMX6?
ECMF02-2HSMX6 was recorded as Obsolete when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for ECMF02-2HSMX6?
Provide the complete ECMF02-2HSMX6 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
ECMF02-2HSMX6 is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.