EPC2TI32N
legacy serial configuration device for Altera programmable logic devices
Key details
| Part Number | EPC2TI32N |
|---|---|
| Manufacturer | Intel (Altera) |
| Category | FPGA Configuration Memory |
| Lifecycle Status | Obsolete |
| Series | EPC2 |
| Package / Case | 32-pin TQFP |
| Pin Count | 32 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-20 |
Part information
EPC2TI32N Overview
EPC2TI32N is a Intel (Altera) legacy serial configuration device for Altera programmable logic devices supplied in 32-pin TQFP. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Configuration Family | EPC2 |
|---|---|
| Configuration Scheme | Serial configuration |
| Approximate Density | 1.6 Mbit class |
| Temperature Grade | Industrial |
| Legacy Support | Altera SRAM-based programmable logic devices |
Package and Ordering Notes
The listed package is 32-pin TQFP with 32 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
EPC2TI32N is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Intel (Altera) documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
EPC2TI32N selection and design context
EPC2TI32N is cataloged as a FPGA Configuration Memory in the EPC2 family. Its recorded function is legacy serial configuration device for Altera programmable logic devices. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Configuration Family: EPC2. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Configuration Scheme: Serial configuration. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Approximate Density: 1.6 Mbit class. Confirm address organization, software support and required usable capacity.
- Temperature Grade: Industrial. Confirm ambient, junction and board-level thermal conditions for the required grade.
Application and qualification considerations
When evaluating this memory device, confirm density, organization, interface mode, supply rails, access or clock timing, erase endurance and software command compatibility. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for EPC2TI32N
The recorded package is 32-pin TQFP, the temperature range is -40°C to +85°C, and the lifecycle status is Obsolete as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
EPC2TI32N FAQ
What distinguishes EPC2TI32N within the EPC2 family?
EPC2TI32N is the exact orderable code for a legacy serial configuration device for Altera programmable logic devices in 32-pin TQFP. Related EPC2 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for EPC2TI32N?
EPC2TI32N is recorded in 32-pin TQFP with 32 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting EPC2TI32N?
Configuration Family is recorded as EPC2, Configuration Scheme is recorded as Serial configuration. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of EPC2TI32N?
EPC2TI32N was recorded as Obsolete when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for EPC2TI32N?
Provide the complete EPC2TI32N orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
EPC2TI32N is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.