FDG6301N
dual 25 V N-channel digital MOSFET for low-voltage load switching
Key details
| Part Number | FDG6301N |
|---|---|
| Manufacturer | onsemi |
| Category | Dual N-Channel MOSFET |
| Lifecycle Status | Production |
| Series | PowerTrench |
| Package / Case | 6-lead SC-70 / SOT-323 |
| Pin Count | 6 |
| Operating Temperature | -55°C to +150°C junction |
| Last Verified | 2026-07-20 |
Part information
FDG6301N Overview
FDG6301N is a onsemi dual 25 V N-channel digital MOSFET for low-voltage load switching supplied in 6-lead SC-70 / SOT-323. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Configuration | Dual N-channel |
|---|---|
| Drain-Source Voltage | 25 V |
| Continuous Drain Current | 0.22 A |
| RDS(on) | 4 Ω maximum at 4.5 V gate drive |
| Package | SC-70-6 |
Package and Ordering Notes
The listed package is 6-lead SC-70 / SOT-323 with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by onsemi as Production at the verification date.
Sourcing Guidance
Confirm current factory lead time, packing format and revision for FDG6301N before placing the order.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against onsemi documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
FDG6301N selection and design context
FDG6301N is cataloged as a Dual N-Channel MOSFET in the PowerTrench family. Its recorded function is dual 25 V N-channel digital MOSFET for low-voltage load switching. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Configuration: Dual N-channel. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Drain-Source Voltage: 25 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
- Continuous Drain Current: 0.22 A. Check steady-state, transient and thermal margin in the intended operating mode.
- RDS(on): 4 Ω maximum at 4.5 V gate drive. Confirm the value and its datasheet test conditions for the exact ordering suffix.
Application and qualification considerations
When evaluating this switching device, confirm voltage and current margin, gate-drive conditions, on-state loss, switching energy, thermal impedance and safe operating area. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for FDG6301N
The recorded package is 6-lead SC-70 / SOT-323, the temperature range is -55°C to +150°C junction, and the lifecycle status is Production as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
FDG6301N FAQ
What distinguishes FDG6301N within the PowerTrench family?
FDG6301N is the exact orderable code for a dual 25 V N-channel digital MOSFET for low-voltage load switching in 6-lead SC-70 / SOT-323. Related PowerTrench devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for FDG6301N?
FDG6301N is recorded in 6-lead SC-70 / SOT-323 with 6 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting FDG6301N?
Configuration is recorded as Dual N-channel, Drain-Source Voltage is recorded as 25 V. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of FDG6301N?
FDG6301N was recorded as Production when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for FDG6301N?
Provide the complete FDG6301N orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Confirm current factory lead time, packing format and revision for FDG6301N before placing the order.