FDV302P
-25 V P-channel digital MOSFET for compact low-current load switching
Key details
| Part Number | FDV302P |
|---|---|
| Manufacturer | onsemi |
| Category | P-Channel MOSFET |
| Lifecycle Status | Production |
| Series | Digital FET |
| Package / Case | 3-pin SOT-23 |
| Pin Count | 3 |
| Operating Temperature | -55°C to +150°C junction |
| Last Verified | 2026-07-20 |
Part information
FDV302P Overview
FDV302P is a onsemi -25 V P-channel digital MOSFET for compact low-current load switching supplied in 3-pin SOT-23. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Drain-Source Voltage | -25 V |
|---|---|
| Continuous Drain Current | -0.12 A |
| RDS(on) | 10 Ω maximum at -4.5 V gate drive |
| Polarity | P-channel |
| Package | SOT-23 |
Package and Ordering Notes
The listed package is 3-pin SOT-23 with 3 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by onsemi as Production at the verification date.
Sourcing Guidance
Confirm current factory lead time, packing format and revision for FDV302P before placing the order.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against onsemi documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
FDV302P selection and design context
FDV302P is cataloged as a P-Channel MOSFET in the Digital FET family. Its recorded function is -25 V P-channel digital MOSFET for compact low-current load switching. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Drain-Source Voltage: -25 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
- Continuous Drain Current: -0.12 A. Check steady-state, transient and thermal margin in the intended operating mode.
- RDS(on): 10 Ω maximum at -4.5 V gate drive. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Polarity: P-channel. Confirm the value and its datasheet test conditions for the exact ordering suffix.
Application and qualification considerations
When evaluating this switching device, confirm voltage and current margin, gate-drive conditions, on-state loss, switching energy, thermal impedance and safe operating area. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for FDV302P
The recorded package is 3-pin SOT-23, the temperature range is -55°C to +150°C junction, and the lifecycle status is Production as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
FDV302P FAQ
What distinguishes FDV302P within the Digital FET family?
FDV302P is the exact orderable code for a -25 V P-channel digital MOSFET for compact low-current load switching in 3-pin SOT-23. Related Digital FET devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for FDV302P?
FDV302P is recorded in 3-pin SOT-23 with 3 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting FDV302P?
Drain-Source Voltage is recorded as -25 V, Continuous Drain Current is recorded as -0.12 A. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of FDV302P?
FDV302P was recorded as Production when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for FDV302P?
Provide the complete FDV302P orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Confirm current factory lead time, packing format and revision for FDV302P before placing the order.