Get Marketing Insights First
Subscribe to receive actionable strategies, growth tips, and industry insights delivered straight to your inbox.
ICM-40604
low-power six-axis motion sensor for compact consumer devices
Specifications
Key details
| Part Number | ICM-40604 |
|---|---|
| Manufacturer | TDK InvenSense |
| Category | 6-Axis IMU |
| Lifecycle Status | NRND |
| Series | ICM-40604 |
| Package / Case | 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm |
| Pin Count | 14 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-21 |
Overview
Part information
ICM-40604 Overview
ICM-40604 is a TDK InvenSense low-power six-axis motion sensor for compact consumer devices supplied in 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Sensor Axes | 3-axis gyroscope and 3-axis accelerometer |
|---|---|
| Gyroscope Range | ±250, ±500, ±1000 and ±2000 dps |
| Accelerometer Range | ±2, ±4, ±8 and ±16 g |
| Digital Interfaces | I²C and SPI |
| Key Function | Low-power 6-axis sensing and FIFO |
Package and Ordering Notes
The listed package is 14-pin LGA, 2.5 mm × 3.0 mm × 0.91 mm with 14 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as NRND; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
ICM-40604 is not recommended for new designs. Confirm current availability and qualify a current-generation alternative before design-in.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against TDK InvenSense documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
Sourcing notes
Lifecycle and sourcing review
NRND
This part may not be recommended for new designs. Confirm package, electrical requirements, firmware behavior and qualification needs before selecting an alternative.
ICM-40604 is not recommended for new designs. Confirm current availability and qualify a current-generation alternative before design-in.
Alternatives
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.