IHLP1212BZER1R0M11

IHLP1212BZER1R0M11 Overview

IHLP1212BZER1R0M11 is a Vishay 1.0 µH shielded low-profile high-current power inductor supplied in 1212 molded SMD, approximately 3.3 mm × 3.3 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Package and Ordering Notes

The listed package is 1212 molded SMD, approximately 3.3 mm × 3.3 mm with 2 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Vishay as Production at the verification date.

Sourcing Guidance

Confirm current factory lead time, packing format and revision for IHLP1212BZER1R0M11 before placing the order.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Vishay documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

IHLP1212BZER1R0M11 FAQ

How IHLP1212BZER1R0M11 differs from related orderable parts

IHLP1212BZER1R0M11 belongs to the IHLP-1212BZ-11 family. Compared with IHLP1212BZER2R2M11, the recorded differences include functional description: 1.0 µH shielded low-profile high-current power inductor versus 2.2 µH shielded low-profile high-current power inductor; Inductance: 1.0 µH, a lower recorded value than 2.2 µH; and Maximum DCR: approximately 20 mΩ; verify exact revision table, a lower recorded value than approximately 42 mΩ; verify exact revision table. A shared family name does not establish pin, firmware or qualification compatibility.

For an RFQ or AVL review, quote the complete IHLP1212BZER1R0M11 code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.

Exact order-code identity for IHLP1212BZER1R0M11

For BOM, label, AVL and RFQ matching, preserve these visible code segments: opening alphabetic sequence IHLP; middle numeric sequence one two one two; middle alphabetic sequence BZER; middle numeric sequence one; middle alphabetic sequence R; middle numeric sequence zero; middle alphabetic sequence M; and terminal numeric sequence one one. The nearest published comparison codes are IHLP1212BZER2R2M11. Compare every segment because a changed character can identify a different density, voltage, package, temperature, qualification or packing option.

Do not shorten the requested code to IHLP-1212BZ-11 or remove its terminal characters. Ask the supplier to reproduce the complete code on the quotation and provide label or traceability evidence when exact suffix matching is mandatory.