IRLML6302TRPBF

IRLML6302TRPBF Overview

IRLML6302TRPBF is a Infineon Technologies 20 V n-channel power MOSFET for switching applications supplied in 3-pin SOT-23. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Package and Ordering Notes

The listed package is 3-pin SOT-23 with 3 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.

Sourcing Guidance

IRLML6302TRPBF is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Infineon Technologies documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

IRLML6302TRPBF FAQ

How IRLML6302TRPBF differs from related orderable parts

IRLML6302TRPBF belongs to the HEXFET / StrongIRFET family. Compared with IRLML2502TRPBF, the recorded differences include Continuous Drain Current: 0.6 A class, a lower recorded value than 4.2 A class and Maximum RDS(on): 600 mΩ class, a higher recorded value than 45 mΩ class. A shared family name does not establish pin, firmware or qualification compatibility.

For an RFQ or AVL review, quote the complete IRLML6302TRPBF code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.

Exact order-code identity for IRLML6302TRPBF

For BOM, label, AVL and RFQ matching, preserve these visible code segments: opening alphabetic sequence IRLML; middle numeric sequence six three zero two; and terminal alphabetic sequence TRPBF. The nearest published comparison codes are IRLML2502TRPBF; IRLML2402TRPBF; and IRLB3034PBF. Compare every segment because a changed character can identify a different density, voltage, package, temperature, qualification or packing option.

Do not shorten the requested code to HEXFET / StrongIRFET or remove its terminal characters. Ask the supplier to reproduce the complete code on the quotation and provide label or traceability evidence when exact suffix matching is mandatory.

IRLML6302TRPBF specification interpretation

The following notes interpret the recorded values for this exact orderable code. They are intended to make model-to-model differences visible during engineering and procurement review; the manufacturer datasheet remains the controlling source.

• Drain-Source Voltage: The recorded value is 20 V, expressed in words as twenty V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
• Polarity: The recorded value is N-channel. Confirm the value and its datasheet test conditions for the exact ordering suffix.
• Continuous Drain Current: The recorded value is 0.6 A class, expressed in words as zero point six A class. Check steady-state, transient and thermal margin in the intended operating mode. The comparison record for IRLML2502TRPBF lists 4.2 A class; this page therefore preserves 0.6 A class as the value associated with IRLML6302TRPBF.
• Maximum RDS(on): The recorded value is 600 mΩ class, expressed in words as six hundred mΩ class. Confirm the value and its datasheet test conditions for the exact ordering suffix. The comparison record for IRLML2502TRPBF lists 45 mΩ class; this page therefore preserves 600 mΩ class as the value associated with IRLML6302TRPBF.
• Technology: The recorded value is Silicon power MOSFET. Confirm the value and its datasheet test conditions for the exact ordering suffix.

Choosing between IRLML6302TRPBF and IRLML2502TRPBF

The decision points below use the values recorded for these two exact orderable codes. Select IRLML6302TRPBF when its stated value is the BOM requirement; select IRLML2502TRPBF only when the alternate value has been independently approved.

• Continuous Drain Current: IRLML6302TRPBF records 0.6 A class, while IRLML2502TRPBF records 4.2 A class. Check steady-state, transient and thermal margin in the intended operating mode.
• Maximum RDS(on): IRLML6302TRPBF records 600 mΩ class, while IRLML2502TRPBF records 45 mΩ class. Confirm the value and its datasheet test conditions for the exact ordering suffix.

If the assembly documentation names IRLML6302TRPBF, require the quotation and supplied label to retain IRLML6302TRPBF in full. A request for IRLML2502TRPBF should be handled as a proposed substitution and reviewed for electrical, mechanical, firmware and qualification impact before approval.