MT29F8G08ADADAH4-IT:D
8Gb 3.3 VOLTS SLC x8 NAND FLASH component
Key details
| Part Number | MT29F8G08ADADAH4-IT:D |
|---|---|
| Manufacturer | Micron Technology |
| Category | SLC NAND Flash |
| Lifecycle Status | Production |
| Series | Micron SLC NAND FLASH |
| Package / Case | 63-ball VFBGA, 9.00 x 11.00 x 1.00 mm |
| Pin Count | 63 |
| Operating Temperature | -40C to +85C |
| Last Verified | 2026-08-10 |
Part information
MT29F8G08ADADAH4-IT:D Overview
MT29F8G08ADADAH4-IT:D is a Micron Technology 8Gb 3.3 VOLTS SLC x8 NAND FLASH component supplied in 63-ball VFBGA, 9.00 x 11.00 x 1.00 mm. This page preserves the exact displayed MPN because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | MT29F8G08ADADAH4-IT:D |
|---|---|
| Capacity | 8Gb |
| Technology | SLC |
| Family | NAND FLASH |
| I/O Voltage | 3.3 VOLTS |
| Bus Width | x8 |
| Component Configuration | 1Gb x8 |
| Package | VFBGA |
| Pin / Ball Count | 63-ball |
| Package Dimensions | 9.00 x 11.00 x 1.00 mm |
| Dry Pack Quantity | 1260 |
| Tape and Reel Quantity | 1000 |
Package and Ordering Notes
The listed package is 63-ball VFBGA, 9.00 x 11.00 x 1.00 mm with 63 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Micron Technology as Production at the verification date.
Sourcing Guidance
MT29F8G08ADADAH4-IT:D is the exact ordering identity in Micron current SLC NAND catalog. Confirm Production lifecycle, -40C to +85C grade, 63-ball VFBGA, 9.00 x 11.00 x 1.00 mm, packing quantity and the linked Micron data-sheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Documentation and Source Status
Technical values were checked against Micron Technology documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
Related Product Resources
Browse the Micron Technology product archive or the SLC NAND Flash category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.
MT29F8G08ADADAH4-IT:D FAQ
What is MT29F8G08ADADAH4-IT:D?
MT29F8G08ADADAH4-IT:D is the exact Micron ordering code for a 8Gb SLC x8 device in the Micron SLC NAND FLASH family. The identity was checked against the linked Micron part-detail record.
What are the key specifications of MT29F8G08ADADAH4-IT:D?
Micron lists 8Gb capacity, 3.3 VOLTS, x8, and -40C to +85C operating temperature for MT29F8G08ADADAH4-IT:D. Use the linked official data sheet for revision-controlled limits.
What package does MT29F8G08ADADAH4-IT:D use?
MT29F8G08ADADAH4-IT:D uses a 63-ball VFBGA package measuring 9.00 x 11.00 x 1.00 mm. These values come from the exact Micron catalog record; verify the package drawing before PCB release.
What is the lifecycle status of MT29F8G08ADADAH4-IT:D?
Micron lists this exact ordering code as Production. This status was checked in Micron’s live current or official obsolete catalog on 2026-08-10; recheck factory support before design-in or procurement.
What should be checked before sourcing MT29F8G08ADADAH4-IT:D?
Quote MT29F8G08ADADAH4-IT:D exactly and verify the -40C to +85C grade, VFBGA package and 63-ball, voltage, packing method, label traceability, and controlling Micron data-sheet revision. Do not substitute a neighboring suffix without a separate qualification.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
MT29F8G08ADADAH4-IT:D is the exact ordering identity in Micron current SLC NAND catalog. Confirm Production lifecycle, -40C to +85C grade, 63-ball VFBGA, 9.00 x 11.00 x 1.00 mm, packing quantity and the linked Micron data-sheet revision before ordering.