MT41J128M16JT-125:K
2Gb 1.5 VOLTS DDR3 x16 memory component
Key details
| Part Number | MT41J128M16JT-125:K |
|---|---|
| Manufacturer | Micron Technology |
| Category | DDR3 SDRAM |
| Lifecycle Status | Production |
| Series | Micron DDR3 DRAM |
| Package / Case | 96-ball FBGA, 8.00 x 14.00 x 1.20 mm |
| Pin Count | 96 |
| Operating Temperature | 0C to +95C |
| Last Verified | 2026-08-13 |
Part information
MT41J128M16JT-125:K Overview
MT41J128M16JT-125:K is a Micron Technology 2Gb 1.5 VOLTS DDR3 x16 memory component supplied in 96-ball FBGA, 8.00 x 14.00 x 1.20 mm. This page preserves the exact displayed MPN because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | MT41J128M16JT-125:K |
|---|---|
| Density | 2Gb |
| Technology | DDR3 |
| Family | DRAM |
| I/O Voltage | 1.5 VOLTS |
| Bus Width | x16 |
| Component Configuration | 128Mb x16 |
| Clock Speed | 800MHz |
| Transfer Rate | 1600MTPS |
| CAS Latency | CL = 11 |
| Package | FBGA |
| Pin / Ball Count | 96-ball |
| Package Dimensions | 8.00 x 14.00 x 1.20 mm |
| Number of Components | 1 |
| Dry Pack Quantity | 1224 |
| Tape and Reel Quantity | 2000 |
Package and Ordering Notes
The listed package is 96-ball FBGA, 8.00 x 14.00 x 1.20 mm with 96 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Micron Technology as Production at the verification date.
Sourcing Guidance
MT41J128M16JT-125:K is the exact Micron ordering identity. Confirm Production lifecycle, 0C to +95C grade, 96-ball FBGA, 8.00 x 14.00 x 1.20 mm, packing and the linked data-sheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Documentation and Source Status
Technical values were checked against Micron Technology documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
Related Product Resources
Browse the Micron Technology product archive or the DDR3 SDRAM category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.
MT41J128M16JT-125:K FAQ
What is MT41J128M16JT-125:K?
MT41J128M16JT-125:K is the exact Micron ordering code for a 2Gb DDR3 x16 memory device in the Micron DDR3 DRAM series. Identity was checked against the linked Micron part-detail record.
What are the key specifications of MT41J128M16JT-125:K?
Micron lists 2Gb, 1.5 VOLTS, 800MHz, 1600MTPS, and 0C to +95C for MT41J128M16JT-125:K. Use the linked official data sheet for revision-controlled limits.
What package does MT41J128M16JT-125:K use?
MT41J128M16JT-125:K uses a 96-ball FBGA package measuring 8.00 x 14.00 x 1.20 mm. Verify the official package drawing before PCB release.
What is the lifecycle status of MT41J128M16JT-125:K?
Micron lists this exact ordering code as Production. This was checked in Micron’s live current or official obsolete catalog on 2026-08-13; recheck factory support before design-in or procurement.
What should be checked before sourcing MT41J128M16JT-125:K?
Quote MT41J128M16JT-125:K exactly and verify the 0C to +95C grade, FBGA package and 96-ball, speed grade, packing, label traceability, and controlling Micron data-sheet revision. Do not substitute a neighboring suffix without separate qualification.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
MT41J128M16JT-125:K is the exact Micron ordering identity. Confirm Production lifecycle, 0C to +95C grade, 96-ball FBGA, 8.00 x 14.00 x 1.20 mm, packing and the linked data-sheet revision before ordering.