MT53E512M32D1ZW-046BWT:B reference image
Reference image 200

MT53E512M32D1ZW-046BWT:B

16Gb 1.1/0.6 VOLTS LPDDR4 x32 memory component

Series
Micron LPDDR4 DRAM
Package
200-ball TFBGA, 10.00 x 14.50 x 1.05 mm
Temperature
-25C to +85C
Specifications

Key details

Part NumberMT53E512M32D1ZW-046BWT:B
ManufacturerMicron Technology
CategoryLPDDR4 SDRAM
Lifecycle StatusProduction
SeriesMicron LPDDR4 DRAM
Package / Case200-ball TFBGA, 10.00 x 14.50 x 1.05 mm
Pin Count200
Operating Temperature-25C to +85C
Last Verified2026-08-19
Overview

Part information

MT53E512M32D1ZW-046BWT:B Overview

MT53E512M32D1ZW-046BWT:B is a Micron Technology 16Gb 1.1/0.6 VOLTS LPDDR4 x32 memory component supplied in 200-ball TFBGA, 10.00 x 14.50 x 1.05 mm. This page preserves the exact displayed MPN because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Verified Ordering CodeMT53E512M32D1ZW-046BWT:B
Density16Gb
TechnologyLPDDR4
FamilyDRAM
I/O Voltage1.1/0.6 VOLTS
Bus Widthx32
Component Configuration512Mb x32
Clock Speed2133MHz
Transfer Rate4266MTPS
CAS LatencyCL = Programmable
PackageTFBGA
Pin / Ball Count200-ball
Package Dimensions10.00 x 14.50 x 1.05 mm
Number of Components1
Dry Pack Quantity1280
Tape and Reel Quantity2000

Package and Ordering Notes

The listed package is 200-ball TFBGA, 10.00 x 14.50 x 1.05 mm with 200 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Micron Technology as Production at the verification date.

Sourcing Guidance

MT53E512M32D1ZW-046BWT:B is the exact Micron ordering identity. Confirm Production lifecycle, -25C to +85C grade, 200-ball TFBGA, 10.00 x 14.50 x 1.05 mm, packing and the linked data-sheet revision before ordering.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Documentation and Source Status

Technical values were checked against Micron Technology documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

Browse the Micron Technology product archive or the LPDDR4 SDRAM category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.

MT53E512M32D1ZW-046BWT:B FAQ

What is MT53E512M32D1ZW-046BWT:B?

MT53E512M32D1ZW-046BWT:B is the exact Micron ordering code for a 16Gb LPDDR4 x32 memory device in the Micron LPDDR4 DRAM series. Identity was checked against the linked Micron part-detail record.

What are the key specifications of MT53E512M32D1ZW-046BWT:B?

Micron lists 16Gb, 1.1/0.6 VOLTS, 2133MHz, 4266MTPS, and -25C to +85C for MT53E512M32D1ZW-046BWT:B. Use the linked official data sheet for revision-controlled limits.

What package does MT53E512M32D1ZW-046BWT:B use?

MT53E512M32D1ZW-046BWT:B uses a 200-ball TFBGA package measuring 10.00 x 14.50 x 1.05 mm. Verify the official package drawing before PCB release.

What is the lifecycle status of MT53E512M32D1ZW-046BWT:B?

Micron lists this exact ordering code as Production. This was checked in Micron’s live current or official obsolete catalog on 2026-08-19; recheck factory support before design-in or procurement.

What should be checked before sourcing MT53E512M32D1ZW-046BWT:B?

Quote MT53E512M32D1ZW-046BWT:B exactly and verify the -25C to +85C grade, TFBGA package and 200-ball, speed grade, packing, label traceability, and controlling Micron data-sheet revision. Do not substitute a neighboring suffix without separate qualification.

Sourcing notes

Lifecycle and sourcing review

Production

Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.

MT53E512M32D1ZW-046BWT:B is the exact Micron ordering identity. Confirm Production lifecycle, -25C to +85C grade, 200-ball TFBGA, 10.00 x 14.50 x 1.05 mm, packing and the linked data-sheet revision before ordering.