
STR-W6052S
650 V PWM offline switching regulator with integrated power MOSFET and low standby power
Key details
| Part Number | STR-W6052S |
|---|---|
| Manufacturer | Sanken Electric |
| Category | Offline AC-DC Converter |
| Lifecycle Status | Obsolete |
| Series | STR-W6000S |
| Package / Case | 6-lead TO-220F-6L |
| Pin Count | 6 |
| Operating Temperature | -20 C to +115 C ambient |
| Last Verified | 2026-07-24 |
Part information
STR-W6052S Overview
STR-W6052S is a Sanken Electric 650 V PWM offline switching regulator with integrated power MOSFET and low standby power supplied in 6-lead TO-220F-6L. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| MOSFET Voltage | 650 V minimum |
|---|---|
| MOSFET RDS(on) | 2.8 Ohm maximum |
| Open-Frame Output | 40 W reference condition |
| Switching Frequency | 67 kHz typical |
| No-Load Input Power | Below 30 mW |
Package and Ordering Notes
The listed package is 6-lead TO-220F-6L with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
STR-W6052S is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Sanken Electric documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
STR-W6052S FAQ
What is STR-W6052S?
STR-W6052S is a Sanken Electric 650 V PWM offline switching regulator with integrated power MOSFET and low standby power. It belongs to the STR-W6000S series.
What are the key specifications of STR-W6052S?
MOSFET Voltage is 650 V minimum, and MOSFET RDS(on) is 2.8 Ohm maximum. Refer to the manufacturer datasheet for limits, test conditions and revision-controlled values.
What package does STR-W6052S use?
STR-W6052S is supplied in 6-lead TO-220F-6L with 6 pins, leads, balls or contacts. Verify the exact footprint and ordering suffix before PCB release.
Is STR-W6052S still in production?
STR-W6052S is obsolete or discontinued. Remaining stock should be checked for traceability, date code, package marking and storage history.
What should be checked before sourcing STR-W6052S?
Confirm the complete MPN, electrical ratings, package, temperature grade and required quantity. Possible alternatives include STR3A453D after a full power-supply redesign review, but compatibility must be verified independently.
Related part numbers
These published records are the closest catalog references to STR-W6052S by manufacturer, product category, series or package. Confirm electrical ratings, pinout and ordering suffixes before substitution.
- STR-W6053S — 650 V PWM offline switching regulator with integrated power MOSFET for higher-power flyback supplies Related by the same series and the same manufacturer.
- ADC0804LCN — 8-bit microprocessor-compatible successive-approximation analog-to-digital converter Related by the same power-conversion product group.
- ADC0809CCN — 8-bit SAR analog-to-digital converter with integrated 8-channel multiplexer Related by the same power-conversion product group.
- B0505S-1W — 1 W unregulated isolated 5 V input to 5 V output DC-DC converter Related by the same power-conversion product group.
How STR-W6052S differs from related orderable parts
STR-W6052S belongs to the STR-W6000S family. Compared with STR-W6053S, the recorded differences include functional description: 650 V PWM offline switching regulator with integrated power MOSFET and low standby power versus 650 V PWM offline switching regulator with integrated power MOSFET for higher-power flyback supplies; MOSFET RDS(on): 2.8 Ohm maximum, a higher recorded value than 1.9 Ohm maximum; and Open-Frame Output: 40 W reference condition, a lower recorded value than 60 W reference condition. A shared family name does not establish pin, firmware or qualification compatibility.
| Part number | Recorded function | Package | Pins / contacts | Temperature | Lifecycle |
|---|---|---|---|---|---|
| STR-W6052S | 650 V PWM offline switching regulator with integrated power MOSFET and low standby power | 6-lead TO-220F-6L | 6 pins, leads or contacts | -20 C to +115 C ambient | Obsolete |
| STR-W6053S | 650 V PWM offline switching regulator with integrated power MOSFET for higher-power flyback supplies | 6-lead TO-220F-6L | 6 pins, leads or contacts | -20 C to +115 C ambient | Obsolete |
For an RFQ or AVL review, quote the complete STR-W6052S code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
STR-W6052S is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.