CY7C68013A-128AXI
discontinued high-speed USB 2.0 peripheral controller with an enhanced 8051 core and 16 KB internal RAM
Key details
| Part Number | CY7C68013A-128AXI |
|---|---|
| Manufacturer | Infineon Technologies |
| Category | USB Microcontroller |
| Lifecycle Status | Obsolete |
| Series | EZ-USB FX2LP |
| Package / Case | 128-pin TQFP, industrial grade |
| Pin Count | 128 |
| Operating Temperature | -40°C to +85°C, industrial |
| Last Verified | 2026-07-26 |
Part information
CY7C68013A-128AXI Overview
CY7C68013A-128AXI is a Infineon Technologies discontinued high-speed USB 2.0 peripheral controller with an enhanced 8051 core and 16 KB internal RAM supplied in 128-pin TQFP, industrial grade. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| USB Interface | USB 2.0 high-speed peripheral, 480 Mbit/s |
|---|---|
| Processor | Enhanced 8051 core |
| Internal RAM | 16 KB |
| Programmable I/O | 40 |
| External Bus | 16-/8-bit 8051 address/data bus |
Package and Ordering Notes
The listed package is 128-pin TQFP, industrial grade with 128 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
CY7C68013A-128AXI is discontinued. Source only with date-code, label, package and traceability checks, and independently qualify CYUSB2316-BF104AXI for redesigns.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Infineon Technologies documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
CY7C68013A-128AXI FAQ
What is CY7C68013A-128AXI?
CY7C68013A-128AXI is a Infineon Technologies discontinued high-speed USB 2.0 peripheral controller with an enhanced 8051 core and 16 KB internal RAM. It belongs to the EZ-USB FX2LP family.
What are the key specifications of CY7C68013A-128AXI?
USB Interface is USB 2.0 high-speed peripheral, 480 Mbit/s, while Processor is Enhanced 8051 core. Check the manufacturer documentation for electrical limits and compatibility conditions.
What package does CY7C68013A-128AXI use?
CY7C68013A-128AXI uses 128-pin TQFP, industrial grade with 128 pins. Confirm the package drawing, land pattern and ordering suffix before PCB release.
What is the lifecycle status of CY7C68013A-128AXI?
CY7C68013A-128AXI was marked END OF LIFE and discontinued by Infineon when verified on 2026-07-26.
What should be checked before sourcing or replacing CY7C68013A-128AXI?
Treat CYUSB2316-BF104AXI as a redesign candidate rather than a drop-in replacement. Verify package, I/O count, firmware, GPIF behavior, clocking, USB descriptors and board-level electrical compatibility.
How CY7C68013A-128AXI differs from related orderable parts
CY7C68013A-128AXI belongs to the EZ-USB FX2LP family. Compared with CY7C68013A-100AXI, the recorded differences include package: 128-pin TQFP, industrial grade versus 100-pin TQFP, industrial grade; pin/contact count: 128 pins, leads or contacts versus 100 pins, leads or contacts; and External Bus: 16-/8-bit 8051 address/data bus, a lower recorded value than Not bonded out on the 100-pin version. A shared family name does not establish pin, firmware or qualification compatibility.
| Part number | Recorded function | Package | Pins / contacts | Temperature | Lifecycle |
|---|---|---|---|---|---|
| CY7C68013A-128AXI | discontinued high-speed USB 2.0 peripheral controller with an enhanced 8051 core and 16 KB internal RAM | 128-pin TQFP, industrial grade | 128 pins, leads or contacts | -40°C to +85°C, industrial | Obsolete |
| CY7C68013A-100AXI | discontinued high-speed USB 2.0 peripheral controller with an enhanced 8051 core and 16 KB internal RAM | 100-pin TQFP, industrial grade | 100 pins, leads or contacts | -40°C to +85°C, industrial | Obsolete |
| CY7C68013A-100AXC | high-speed USB 2.0 peripheral controller with enhanced 8051 core and 16 KB internal RAM | 100-pin TQFP, Pb-free | 100 pins, leads or contacts | 0°C to +70°C, commercial | Production |
| CY7C68013A-128AXC | high-speed USB 2.0 peripheral controller with enhanced 8051 core, 16 KB RAM and external address/data bus | 128-pin TQFP, Pb-free | 128 pins, leads or contacts | 0°C to +70°C, commercial | Production |
For an RFQ or AVL review, quote the complete CY7C68013A-128AXI code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
CY7C68013A-128AXI is discontinued. Source only with date-code, label, package and traceability checks, and independently qualify CYUSB2316-BF104AXI for redesigns.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.