NLASB3157DFT2G
single-pole double-throw CMOS analog switch with break-before-make operation
Key details
| Part Number | NLASB3157DFT2G |
|---|---|
| Manufacturer | onsemi |
| Category | Analog Switch |
| Lifecycle Status | Production |
| Series | NLASB3157 |
| Package / Case | 6-lead SC-88, 3000-piece tape and reel |
| Pin Count | 6 |
| Operating Temperature | -55°C to +125°C |
| Last Verified | 2026-08-04 |
Part information
NLASB3157DFT2G Overview
NLASB3157DFT2G is a onsemi single-pole double-throw CMOS analog switch with break-before-make operation supplied in 6-lead SC-88, 3000-piece tape and reel. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | NLASB3157DFT2G |
|---|---|
| Typical On-Resistance | 3 Ω at VCC = 4.5 V |
| Typical Propagation Delay | 1.0 ns at VCC = 5.0 V |
| Maximum Supply Current | 2.0 µA at 25°C |
| Select-Pin Overvoltage Tolerance | up to 7.0 V |
| Switch Configuration | SPDT, break-before-make |
Package and Ordering Notes
The listed package is 6-lead SC-88, 3000-piece tape and reel with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by onsemi as Production at the verification date.
Sourcing Guidance
NLASB3157DFT2G is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against onsemi documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
Related Product Resources
Browse the onsemi product archive or the Analog Switch category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.
NLASB3157DFT2G FAQ
What is NLASB3157DFT2G?
NLASB3157DFT2G is a onsemi single-pole double-throw CMOS analog switch with break-before-make operation. The verified manufacturer ordering code is NLASB3157DFT2G.
What are the key specifications of NLASB3157DFT2G?
Verified Ordering Code is NLASB3157DFT2G, while Typical On-Resistance is 3 Ω at VCC = 4.5 V. Use the linked manufacturer datasheet for revision-controlled limits and test conditions.
What package does NLASB3157DFT2G use?
NLASB3157DFT2G is supplied in 6-lead SC-88, 3000-piece tape and reel with 6 pins, leads, lands or contacts. Verify the manufacturer drawing and packing format before PCB or procurement approval.
What is the lifecycle status of NLASB3157DFT2G?
NLASB3157DFT2G is listed by the manufacturer as an active production device as checked on 2026-08-04. Confirm factory support and availability for the exact order code before ordering.
What should be checked before sourcing NLASB3157DFT2G?
Quote NLASB3157DFT2G exactly and confirm package, packing, marking, date code, traceability, lifecycle status, and the controlling datasheet revision. Do not substitute a related family code without an independent electrical and mechanical review.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
NLASB3157DFT2G is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.