NFM18PC225B1A3D
three-terminal low-ESL chip feedthrough capacitor for power-line noise suppression
Key details
| Part Number | NFM18PC225B1A3D |
|---|---|
| Manufacturer | Murata Manufacturing |
| Category | Feedthrough Capacitor |
| Lifecycle Status | Obsolete |
| Series | EMIFIL NFM18PC |
| Package / Case | 0603 (1608 metric) three-terminal SMD, paper tape and reel |
| Pin Count | 3 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-08-04 |
Part information
NFM18PC225B1A3D Overview
NFM18PC225B1A3D is a Murata Manufacturing three-terminal low-ESL chip feedthrough capacitor for power-line noise suppression supplied in 0603 (1608 metric) three-terminal SMD, paper tape and reel. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Verified Ordering Code | NFM18PC225B1A3D |
|---|---|
| Nominal Capacitance | 2.2 µF |
| Capacitance Tolerance | ±20% |
| Rated Voltage | 10 Vdc |
| Rated Current | 4 A |
| Maximum DC Resistance | 10 mΩ |
Package and Ordering Notes
The listed package is 0603 (1608 metric) three-terminal SMD, paper tape and reel with 3 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
NFM18PC225B1A3D is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Murata Manufacturing documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
Related Product Resources
Browse the Murata Manufacturing product archive or the Feedthrough Capacitor category for precisely classified internal resources. Related family codes are not presented as substitutes unless the manufacturer explicitly identifies them.
NFM18PC225B1A3D FAQ
What is NFM18PC225B1A3D?
NFM18PC225B1A3D is a Murata Manufacturing three-terminal low-ESL chip feedthrough capacitor for power-line noise suppression. The verified manufacturer ordering code is NFM18PC225B1A3D.
What are the key specifications of NFM18PC225B1A3D?
Verified Ordering Code is NFM18PC225B1A3D, while Nominal Capacitance is 2.2 µF. Use the linked manufacturer datasheet for revision-controlled limits and test conditions.
What package does NFM18PC225B1A3D use?
NFM18PC225B1A3D is supplied in 0603 (1608 metric) three-terminal SMD, paper tape and reel with 3 pins, leads, lands or contacts. Verify the manufacturer drawing and packing format before PCB or procurement approval.
What is the lifecycle status of NFM18PC225B1A3D?
NFM18PC225B1A3D is listed by the manufacturer as obsolete or out of production as checked on 2026-08-04. Confirm factory support and availability for the exact order code before ordering.
What should be checked before sourcing NFM18PC225B1A3D?
Quote NFM18PC225B1A3D exactly and confirm package, packing, marking, date code, traceability, lifecycle status, and the controlling datasheet revision. Do not substitute a related family code without an independent electrical and mechanical review.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
NFM18PC225B1A3D is the manufacturer-verified ordering identity for this record. Confirm package, packing, label traceability, date code, lifecycle, and datasheet revision before ordering.