AFBR-57R5APZ
850 nm multimode Fibre Channel SFP optical transceiver with digital diagnostics
Key details
| Part Number | AFBR-57R5APZ |
|---|---|
| Manufacturer | Broadcom |
| Category | Fiber Optic Transceiver |
| Lifecycle Status | Obsolete |
| Series | AFBR-57R5 |
| Package / Case | 20-contact SFP module |
| Pin Count | 20 |
| Operating Temperature | -10°C to +85°C |
| Last Verified | 2026-07-18 |
Part information
AFBR-57R5APZ Overview
AFBR-57R5APZ is a Broadcom 850 nm multimode Fibre Channel SFP optical transceiver with digital diagnostics supplied in 20-contact SFP module. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Wavelength | 850 nm |
|---|---|
| Data Rates | 1.0625, 2.125 and 4.25 GBd |
| Supply Voltage | 2.97 V to 3.63 V |
| Connector | Duplex LC |
| Fiber Type | Multimode fiber |
Package and Ordering Notes
The listed package is 20-contact SFP module with 20 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
AFBR-57R5APZ is a legacy or obsolete orderable code. Source only with date-code, label, package and traceability checks appropriate to the application.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Broadcom documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
AFBR-57R5APZ selection and design context
AFBR-57R5APZ is cataloged as a Fiber Optic Transceiver in the AFBR-57R5 family. Its recorded function is 850 nm multimode Fibre Channel SFP optical transceiver with digital diagnostics. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Wavelength: 850 nm. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Data Rates: 1.0625, 2.125 and 4.25 GBd. Confirm system timing margin and the test conditions attached to the published limit.
- Supply Voltage: 2.97 V to 3.63 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
- Connector: Duplex LC. Confirm the value and its datasheet test conditions for the exact ordering suffix.
Application and qualification considerations
When evaluating this interface device, confirm protocol revision, signaling voltage, data rate, termination, ESD protection, clocking and host-side driver requirements. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for AFBR-57R5APZ
The recorded package is 20-contact SFP module, the temperature range is -10°C to +85°C, and the lifecycle status is Obsolete as of 2026-07-18. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
AFBR-57R5APZ FAQ
What distinguishes AFBR-57R5APZ within the AFBR-57R5 family?
AFBR-57R5APZ is the exact orderable code for a 850 nm multimode Fibre Channel SFP optical transceiver with digital diagnostics in 20-contact SFP module. Related AFBR-57R5 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for AFBR-57R5APZ?
AFBR-57R5APZ is recorded in 20-contact SFP module with 20 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting AFBR-57R5APZ?
Wavelength is recorded as 850 nm, Data Rates is recorded as 1.0625, 2.125 and 4.25 GBd. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of AFBR-57R5APZ?
AFBR-57R5APZ was recorded as Obsolete when verified on 2026-07-18. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for AFBR-57R5APZ?
Provide the complete AFBR-57R5APZ orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
AFBR-57R5APZ is a legacy or obsolete orderable code. Source only with date-code, label, package and traceability checks appropriate to the application.