HSMH-C170 reference image
Reference image 2
Broadcom Chip LED Obsolete

HSMH-C170

red AlGaAs surface-mount chip LED with a wide viewing angle

Series
HSMH-C170
Package
0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm
Temperature
-40°C to +85°C
Specifications

Key details

Part NumberHSMH-C170
ManufacturerBroadcom
CategoryChip LED
Lifecycle StatusObsolete
SeriesHSMH-C170
Package / Case0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm
Pin Count2
Operating Temperature-40°C to +85°C
Last Verified2026-07-21
Overview

Part information

HSMH-C170 Overview

HSMH-C170 is a Broadcom red AlGaAs surface-mount chip LED with a wide viewing angle supplied in 0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

ColorRed
Dominant Wavelength639 nm typical
Forward Voltage1.8 V typical
Test Current20 mA
Viewing Angle170°

Package and Ordering Notes

The listed package is 0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm with 2 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.

Sourcing Guidance

HSMH-C170 is obsolete or discontinued. Require date-code, label, package and traceability checks, and validate any replacement independently.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Broadcom documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

HSMH-C170 selection and design context

HSMH-C170 is cataloged as a Chip LED in the HSMH-C170 family. Its recorded function is red AlGaAs surface-mount chip LED with a wide viewing angle. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.

  • Color: Red. Confirm the value and its datasheet test conditions for the exact ordering suffix.
  • Dominant Wavelength: 639 nm typical. Confirm the value and its datasheet test conditions for the exact ordering suffix.
  • Forward Voltage: 1.8 V typical. Check rail compatibility, tolerance and sequencing under worst-case conditions.
  • Test Current: 20 mA. Check steady-state, transient and thermal margin in the intended operating mode.

Application and qualification considerations

When evaluating this component, confirm the ratings that control system compatibility, including supply conditions, interface or signal limits, timing, thermal behavior and package constraints. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.

Procurement checks for HSMH-C170

The recorded package is 0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm, the temperature range is -40°C to +85°C, and the lifecycle status is Obsolete as of 2026-07-21. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.

HSMH-C170 FAQ

What distinguishes HSMH-C170 within the HSMH-C170 family?

HSMH-C170 is the exact orderable code for a red AlGaAs surface-mount chip LED with a wide viewing angle in 0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm. Related HSMH-C170 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.

What package and footprint checks are required for HSMH-C170?

HSMH-C170 is recorded in 0805 chip LED, 2.0 mm × 1.25 mm × 0.8 mm with 2 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.

Which specifications should be verified when selecting HSMH-C170?

Color is recorded as Red, Dominant Wavelength is recorded as 639 nm typical. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.

What is the lifecycle status of HSMH-C170?

HSMH-C170 was recorded as Obsolete when verified on 2026-07-21. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.

What information should be included in an RFQ for HSMH-C170?

Provide the complete HSMH-C170 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.

Sourcing notes

Lifecycle and sourcing review

Obsolete

This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.

HSMH-C170 is obsolete or discontinued. Require date-code, label, package and traceability checks, and validate any replacement independently.

Alternatives

Potential alternative part numbers

Verify package, pinout, voltage, firmware behavior and qualification before substitution.