EPM240T100C5
240-logic-element MAX II CPLD in a 100-pin TQFP package
Key details
| Part Number | EPM240T100C5 |
|---|---|
| Manufacturer | Intel (Altera) |
| Category | CPLD |
| Lifecycle Status | Obsolete |
| Series | MAX II EPM240 |
| Package / Case | 100-pin TQFP |
| Pin Count | 100 |
| Operating Temperature | 0°C to +85°C |
| Last Verified | 2026-07-20 |
Part information
EPM240T100C5 Overview
EPM240T100C5 is a Intel (Altera) 240-logic-element MAX II CPLD in a 100-pin TQFP package supplied in 100-pin TQFP. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Logic Elements | 240 |
|---|---|
| Maximum User I/O | 80 |
| Speed Grade | 5 |
| Core Voltage | 1.8 V |
| Device Family | MAX II CPLD |
Package and Ordering Notes
The listed package is 100-pin TQFP with 100 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
EPM240T100C5 is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Intel (Altera) documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
EPM240T100C5 selection and design context
EPM240T100C5 is cataloged as a CPLD in the MAX II EPM240 family. Its recorded function is 240-logic-element MAX II CPLD in a 100-pin TQFP package. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Logic Elements: 240. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Maximum User I/O: 80. Confirm logic levels, signaling mode, host support and required external components.
- Speed Grade: 5. Confirm system timing margin and the test conditions attached to the published limit.
- Core Voltage: 1.8 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
Application and qualification considerations
When evaluating this component, confirm the ratings that control system compatibility, including supply conditions, interface or signal limits, timing, thermal behavior and package constraints. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for EPM240T100C5
The recorded package is 100-pin TQFP, the temperature range is 0°C to +85°C, and the lifecycle status is Obsolete as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
EPM240T100C5 FAQ
What distinguishes EPM240T100C5 within the MAX II EPM240 family?
EPM240T100C5 is the exact orderable code for a 240-logic-element MAX II CPLD in a 100-pin TQFP package in 100-pin TQFP. Related MAX II EPM240 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for EPM240T100C5?
EPM240T100C5 is recorded in 100-pin TQFP with 100 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting EPM240T100C5?
Logic Elements is recorded as 240, Maximum User I/O is recorded as 80. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of EPM240T100C5?
EPM240T100C5 was recorded as Obsolete when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for EPM240T100C5?
Provide the complete EPM240T100C5 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
EPM240T100C5 is obsolete or discontinued. Source only with date-code, label, package and traceability checks, and validate the suggested replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.