FDMF3035
50 A integrated smart power stage with driver and high-side/low-side MOSFETs
Key details
| Part Number | FDMF3035 |
|---|---|
| Manufacturer | onsemi |
| Category | Smart Power Stage |
| Lifecycle Status | Production |
| Series | FDMF3035 |
| Package / Case | 31-lead PQFN, 5 mm × 5 mm |
| Pin Count | 31 |
| Operating Temperature | -40°C to +125°C |
| Last Verified | 2026-07-20 |
Part information
FDMF3035 Overview
FDMF3035 is a onsemi 50 A integrated smart power stage with driver and high-side/low-side MOSFETs supplied in 31-lead PQFN, 5 mm × 5 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Output Current | 50 A class |
|---|---|
| Switching Frequency | Up to 1.5 MHz |
| Integration | Gate driver plus high-side and low-side MOSFETs |
| Interface | PWM input with current and temperature monitoring |
| Application | Multiphase voltage regulators |
Package and Ordering Notes
The listed package is 31-lead PQFN, 5 mm × 5 mm with 31 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by onsemi as Production at the verification date.
Sourcing Guidance
Confirm current factory lead time, packing format and revision for FDMF3035 before placing the order.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against onsemi documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
FDMF3035 selection and design context
FDMF3035 is cataloged as a Smart Power Stage in the FDMF3035 family. Its recorded function is 50 A integrated smart power stage with driver and high-side/low-side MOSFETs. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Output Current: 50 A class. Check steady-state, transient and thermal margin in the intended operating mode.
- Switching Frequency: Up to 1.5 MHz. Confirm system timing margin and the test conditions attached to the published limit.
- Integration: Gate driver plus high-side and low-side MOSFETs. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Interface: PWM input with current and temperature monitoring. Confirm logic levels, signaling mode, host support and required external components.
Application and qualification considerations
When evaluating this component, confirm the ratings that control system compatibility, including supply conditions, interface or signal limits, timing, thermal behavior and package constraints. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for FDMF3035
The recorded package is 31-lead PQFN, 5 mm × 5 mm, the temperature range is -40°C to +125°C, and the lifecycle status is Production as of 2026-07-20. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
FDMF3035 FAQ
What distinguishes FDMF3035 within the FDMF3035 family?
FDMF3035 is the exact orderable code for a 50 A integrated smart power stage with driver and high-side/low-side MOSFETs in 31-lead PQFN, 5 mm × 5 mm. Related FDMF3035 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for FDMF3035?
FDMF3035 is recorded in 31-lead PQFN, 5 mm × 5 mm with 31 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting FDMF3035?
Output Current is recorded as 50 A class, Switching Frequency is recorded as Up to 1.5 MHz. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of FDMF3035?
FDMF3035 was recorded as Production when verified on 2026-07-20. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for FDMF3035?
Provide the complete FDMF3035 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Confirm current factory lead time, packing format and revision for FDMF3035 before placing the order.