HS3001
high-accuracy digital relative-humidity and temperature sensor with I²C interface
Key details
| Part Number | HS3001 |
|---|---|
| Manufacturer | Renesas Electronics |
| Category | Humidity and Temperature Sensor |
| Lifecycle Status | Obsolete |
| Series | HS3000 |
| Package / Case | 6-pin LGA, 3.0 mm × 2.41 mm × 0.8 mm |
| Pin Count | 6 |
| Operating Temperature | -40°C to +125°C |
| Last Verified | 2026-07-21 |
Part information
HS3001 Overview
HS3001 is a Renesas Electronics high-accuracy digital relative-humidity and temperature sensor with I²C interface supplied in 6-pin LGA, 3.0 mm × 2.41 mm × 0.8 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Relative Humidity Accuracy | ±1.5% RH typical |
|---|---|
| Temperature Accuracy | ±0.2°C typical from -10°C to +80°C |
| Resolution | 14 bit |
| Supply Voltage | 1.8 V to 3.6 V |
| Interface | I²C |
Package and Ordering Notes
The listed package is 6-pin LGA, 3.0 mm × 2.41 mm × 0.8 mm with 6 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
HS3001 is obsolete or discontinued. Require date-code, label, package and traceability checks, and validate any replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Renesas Electronics documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
HS3001 selection and design context
HS3001 is cataloged as a Humidity and Temperature Sensor in the HS3000 family. Its recorded function is high-accuracy digital relative-humidity and temperature sensor with I²C interface. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Relative Humidity Accuracy: ±1.5% RH typical. Use the worst-case datasheet limit rather than a typical headline value.
- Temperature Accuracy: ±0.2°C typical from -10°C to +80°C. Confirm ambient, junction and board-level thermal conditions for the required grade.
- Resolution: 14 bit. Use the worst-case datasheet limit rather than a typical headline value.
- Supply Voltage: 1.8 V to 3.6 V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
Application and qualification considerations
When evaluating this sensor, confirm measurement range, sensitivity, noise, output data rate, interface voltage, calibration needs and mechanical orientation. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for HS3001
The recorded package is 6-pin LGA, 3.0 mm × 2.41 mm × 0.8 mm, the temperature range is -40°C to +125°C, and the lifecycle status is Obsolete as of 2026-07-21. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
HS3001 FAQ
What distinguishes HS3001 within the HS3000 family?
HS3001 is the exact orderable code for a high-accuracy digital relative-humidity and temperature sensor with I²C interface in 6-pin LGA, 3.0 mm × 2.41 mm × 0.8 mm. Related HS3000 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for HS3001?
HS3001 is recorded in 6-pin LGA, 3.0 mm × 2.41 mm × 0.8 mm with 6 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting HS3001?
Relative Humidity Accuracy is recorded as ±1.5% RH typical, Temperature Accuracy is recorded as ±0.2°C typical from -10°C to +80°C. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of HS3001?
HS3001 was recorded as Obsolete when verified on 2026-07-21. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for HS3001?
Provide the complete HS3001 orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
HS3001 is obsolete or discontinued. Require date-code, label, package and traceability checks, and validate any replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.