ICL8038CCPD
precision waveform generator producing sine, triangle and square-wave outputs
Key details
| Part Number | ICL8038CCPD |
|---|---|
| Manufacturer | Renesas Electronics |
| Category | Waveform Generator |
| Lifecycle Status | Obsolete |
| Series | ICL8038 |
| Package / Case | 14-pin PDIP |
| Pin Count | 14 |
| Operating Temperature | 0°C to +70°C |
| Last Verified | 2026-07-21 |
Part information
ICL8038CCPD Overview
ICL8038CCPD is a Renesas Electronics precision waveform generator producing sine, triangle and square-wave outputs supplied in 14-pin PDIP. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Waveforms | Sine, triangle and square |
|---|---|
| Frequency Range | 0.001 Hz to above 300 kHz |
| Sine Distortion | Approximately 1% typical |
| Frequency Drift | 250 ppm/°C typical |
| Supply Mode | Single or dual supply |
Package and Ordering Notes
The listed package is 14-pin PDIP with 14 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
ICL8038CCPD is obsolete or discontinued. Require date-code, label, package and traceability checks, and validate any replacement independently.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Renesas Electronics documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
ICL8038CCPD selection and design context
ICL8038CCPD is cataloged as a Waveform Generator in the ICL8038 family. Its recorded function is precision waveform generator producing sine, triangle and square-wave outputs. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Waveforms: Sine, triangle and square. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Frequency Range: 0.001 Hz to above 300 kHz. Confirm system timing margin and the test conditions attached to the published limit.
- Sine Distortion: Approximately 1% typical. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Frequency Drift: 250 ppm/°C typical. Confirm system timing margin and the test conditions attached to the published limit.
Application and qualification considerations
When evaluating this component, confirm the ratings that control system compatibility, including supply conditions, interface or signal limits, timing, thermal behavior and package constraints. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for ICL8038CCPD
The recorded package is 14-pin PDIP, the temperature range is 0°C to +70°C, and the lifecycle status is Obsolete as of 2026-07-21. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
ICL8038CCPD FAQ
What distinguishes ICL8038CCPD within the ICL8038 family?
ICL8038CCPD is the exact orderable code for a precision waveform generator producing sine, triangle and square-wave outputs in 14-pin PDIP. Related ICL8038 devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for ICL8038CCPD?
ICL8038CCPD is recorded in 14-pin PDIP with 14 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting ICL8038CCPD?
Waveforms is recorded as Sine, triangle and square, Frequency Range is recorded as 0.001 Hz to above 300 kHz. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of ICL8038CCPD?
ICL8038CCPD was recorded as Obsolete when verified on 2026-07-21. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for ICL8038CCPD?
Provide the complete ICL8038CCPD orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
ICL8038CCPD is obsolete or discontinued. Require date-code, label, package and traceability checks, and validate any replacement independently.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.