MX29LV800CTTI-70G

MX29LV800CTTI-70G Overview

MX29LV800CTTI-70G is a Macronix 8Mb 3V top-boot parallel NOR Flash with 70ns access supplied in 48-TSOP. This page uses the exact orderable code because package, speed, temperature and option suffixes can change compatibility.

Key Technical Specifications

Package and Ordering Notes

The listed package is 48-TSOP with 48 pins/lands/balls. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The family is listed by Macronix as Production at the verification date.

Sourcing Guidance

The T code denotes top boot. Confirm the boot-block map and 48-TSOP package; the bottom-boot variant is not firmware-map equivalent.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Macronix documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

MX29LV800CTTI-70G selection and design context

MX29LV800CTTI-70G is cataloged as a Parallel NOR Flash in the MX29LV800C T/B family. Its recorded function is 8Mb 3V top-boot parallel NOR Flash with 70ns access. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.

• Memory Density: 8Mb. Confirm address organization, software support and required usable capacity.
• Organization: 1M x 8 / 512K x 16. Confirm address organization, software support and required usable capacity.
• Interface: Parallel NOR, x8/x16. Confirm logic levels, signaling mode, host support and required external components.
• Supply Voltage: 2.7V to 3.6V. Check rail compatibility, tolerance and sequencing under worst-case conditions.

Application and qualification considerations

When evaluating this memory device, confirm density, organization, interface mode, supply rails, access or clock timing, erase endurance and software command compatibility. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.

Procurement checks for MX29LV800CTTI-70G

The recorded package is 48-TSOP, the temperature range is -40°C to +85°C (Industrial), and the lifecycle status is Production as of 20260717. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.

MX29LV800CTTI-70G FAQ

How MX29LV800CTTI-70G differs from related orderable parts

MX29LV800CTTI-70G belongs to the MX29LV800C T/B family. Compared with MX29LV800CBTI-70G, the recorded differences include functional description: 8Mb 3V top-boot parallel NOR Flash with 70ns access versus 8Mb 3V bottom-boot parallel NOR Flash with 70ns access and Sector Architecture: Top boot rather than Bottom boot. A shared family name does not establish pin, firmware or qualification compatibility.

For an RFQ or AVL review, quote the complete MX29LV800CTTI-70G code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.

Exact order-code identity for MX29LV800CTTI-70G

For BOM, label, AVL and RFQ matching, preserve these visible code segments: opening alphabetic sequence MX; middle numeric sequence two nine; middle alphabetic sequence LV; middle numeric sequence eight zero zero; middle alphabetic sequence CTTI; middle numeric sequence seven zero; and terminal alphabetic sequence G. The nearest published comparison codes are MX29LV800CBTI-70G; MX29LV040CTI-70G; and MX29GL128FHT2I-90G. Compare every segment because a changed character can identify a different density, voltage, package, temperature, qualification or packing option.

Do not shorten the requested code to MX29LV800C T/B or remove its terminal characters. Ask the supplier to reproduce the complete code on the quotation and provide label or traceability evidence when exact suffix matching is mandatory.