THGBMNG5D1LBAIL
4 GB embedded managed NAND flash memory compliant with eMMC 5.0
Key details
| Part Number | THGBMNG5D1LBAIL |
|---|---|
| Manufacturer | Kioxia (Toshiba Memory legacy) |
| Category | eMMC Managed NAND |
| Lifecycle Status | Obsolete |
| Series | THGBMNG |
| Package / Case | 11.5 mm x 13 mm x 0.8 mm FBGA |
| Pin Count | 153 |
| Operating Temperature | -25 C to +85 C consumer class; confirm suffix |
| Last Verified | 2026-07-24 |
Part information
THGBMNG5D1LBAIL Overview
THGBMNG5D1LBAIL is a Kioxia (Toshiba Memory legacy) 4 GB embedded managed NAND flash memory compliant with eMMC 5.0 supplied in 11.5 mm x 13 mm x 0.8 mm FBGA. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Capacity | 4 GB |
|---|---|
| Interface | JEDEC eMMC 5.0 |
| Package Size | 11.5 mm x 13 mm x 0.8 mm |
| Supply | 2.7 V to 3.6 V VCC; dual-voltage VCCQ support varies |
| Managed Functions | Integrated controller, ECC and block management |
Package and Ordering Notes
The listed package is 11.5 mm x 13 mm x 0.8 mm FBGA with 153 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.
Sourcing Guidance
THGBMNG5D1LBAIL is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Kioxia (Toshiba Memory legacy) documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
THGBMNG5D1LBAIL FAQ
What is THGBMNG5D1LBAIL?
THGBMNG5D1LBAIL is a Kioxia (Toshiba Memory legacy) 4 GB embedded managed NAND flash memory compliant with eMMC 5.0. It belongs to the THGBMNG series.
What are the key specifications of THGBMNG5D1LBAIL?
Capacity is 4 GB, and Interface is JEDEC eMMC 5.0. Refer to the manufacturer datasheet for limits, test conditions and revision-controlled values.
What package does THGBMNG5D1LBAIL use?
THGBMNG5D1LBAIL is supplied in 11.5 mm x 13 mm x 0.8 mm FBGA with 153 pins, leads, balls or contacts. Verify the exact footprint and ordering suffix before PCB release.
Is THGBMNG5D1LBAIL still in production?
THGBMNG5D1LBAIL is obsolete or discontinued. Remaining stock should be checked for traceability, date code, package marking and storage history.
What should be checked before sourcing THGBMNG5D1LBAIL?
Confirm the complete MPN, electrical ratings, package, temperature grade and required quantity. Possible alternatives include Select a current Kioxia eMMC after verifying capacity, eMMC revision, voltage, package height, ball map and firmware behavior, but compatibility must be verified independently.
Lifecycle and sourcing review
This part has a legacy lifecycle status. Submit the exact MPN, quantity, delivery destination and date-code requirements for a sourcing review.
THGBMNG5D1LBAIL is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.