THGBMFG7C1LBAIL

THGBMFG7C1LBAIL Overview

THGBMFG7C1LBAIL is a Kioxia (Toshiba Memory legacy) 16 GB embedded managed NAND flash memory compliant with eMMC 5.0 supplied in 11.5 mm x 13 mm x 0.8 mm FBGA. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.

Key Technical Specifications

Package and Ordering Notes

The listed package is 11.5 mm x 13 mm x 0.8 mm FBGA with 153 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. Lifecycle is recorded as Obsolete; confirm current factory support and last-time-buy constraints before design-in.

Sourcing Guidance

THGBMFG7C1LBAIL is obsolete or discontinued. Require traceability, date-code, package-marking and storage-condition checks for remaining stock.

For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.

Manufacturer Documentation

Technical values were checked against Kioxia (Toshiba Memory legacy) documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.

THGBMFG7C1LBAIL FAQ

How THGBMFG7C1LBAIL differs from related orderable parts

THGBMFG7C1LBAIL belongs to the THGBMFG family. Compared with THGBMFG6C1LBAIL, the recorded differences include functional description: 16 GB embedded managed NAND flash memory compliant with eMMC 5.0 versus 8 GB embedded managed NAND flash memory compliant with eMMC 5.0 and Capacity: 16 GB, a higher recorded value than 8 GB. A shared family name does not establish pin, firmware or qualification compatibility.

For an RFQ or AVL review, quote the complete THGBMFG7C1LBAIL code and verify the manufacturer ordering table, package drawing, packing method and revision. The related numbers above are comparison references, not declared drop-in replacements.

Exact order-code identity for THGBMFG7C1LBAIL

For BOM, label, AVL and RFQ matching, preserve these visible code segments: opening alphabetic sequence THGBMFG; middle numeric sequence seven; middle alphabetic sequence C; middle numeric sequence one; and terminal alphabetic sequence LBAIL. The nearest published comparison codes are THGBMFG6C1LBAIL; THGBMFG8C2LBAIL; and THGBMHG6C1LBAIL. Compare every segment because a changed character can identify a different density, voltage, package, temperature, qualification or packing option.

Do not shorten the requested code to THGBMFG or remove its terminal characters. Ask the supplier to reproduce the complete code on the quotation and provide label or traceability evidence when exact suffix matching is mandatory.

THGBMFG7C1LBAIL specification interpretation

The following notes interpret the recorded values for this exact orderable code. They are intended to make model-to-model differences visible during engineering and procurement review; the manufacturer datasheet remains the controlling source.

• Capacity: The recorded value is 16 GB, expressed in words as sixteen GB. Confirm address organization, software support and required usable capacity. The comparison record for THGBMFG6C1LBAIL lists 8 GB; this page therefore preserves 16 GB as the value associated with THGBMFG7C1LBAIL.
• Interface: The recorded value is JEDEC eMMC 5.0, expressed in words as JEDEC eMMC five point zero. Confirm logic levels, signaling mode, host support and required external components.
• Package Size: The recorded value is 11.5 mm x 13 mm x 0.8 mm, expressed in words as eleven point five mm x thirteen mm x zero point eight mm. Confirm the value and its datasheet test conditions for the exact ordering suffix.
• Supply: The recorded value is 2.7 V to 3.6 V VCC; dual-voltage VCCQ support varies, expressed in words as two point seven V to three point six V VCC; dual-voltage VCCQ support varies. Check rail compatibility, tolerance and sequencing under worst-case conditions.
• Managed Functions: The recorded value is Integrated controller, ECC and block management. Confirm the value and its datasheet test conditions for the exact ordering suffix.

Choosing between THGBMFG7C1LBAIL and THGBMFG6C1LBAIL

The decision points below use the values recorded for these two exact orderable codes. Select THGBMFG7C1LBAIL when its stated value is the BOM requirement; select THGBMFG6C1LBAIL only when the alternate value has been independently approved.

• functional description: the current page records 16 GB embedded managed NAND flash memory compliant with eMMC 5.0, while the comparison page records 8 GB embedded managed NAND flash memory compliant with eMMC 5.0. This difference can affect intended function and feature set.
• Capacity: THGBMFG7C1LBAIL records 16 GB, while THGBMFG6C1LBAIL records 8 GB. Confirm address organization, software support and required usable capacity.

If the assembly documentation names THGBMFG7C1LBAIL, require the quotation and supplied label to retain THGBMFG7C1LBAIL in full. A request for THGBMFG6C1LBAIL should be handled as a proposed substitution and reviewed for electrical, mechanical, firmware and qualification impact before approval.