BMI088
high-performance 6-axis inertial measurement unit optimized for vibration-rich drone and robotics applications
Key details
| Part Number | BMI088 |
|---|---|
| Manufacturer | Bosch Sensortec |
| Category | Inertial Measurement Unit |
| Lifecycle Status | Production |
| Series | BMI088 |
| Package / Case | 16-pin LGA, 3.0 mm x 4.5 mm x 0.95 mm |
| Pin Count | 16 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-29 |
Part information
BMI088 Overview
BMI088 is a Bosch Sensortec high-performance 6-axis inertial measurement unit optimized for vibration-rich drone and robotics applications supplied in 16-pin LGA, 3.0 mm x 4.5 mm x 0.95 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Bosch Sales Part Number | 0 273 141 365 |
|---|---|
| Bosch Datasheet Document | BST-BMI088-DS000-19 |
| Sensor Axes | 3-axis accelerometer plus 3-axis gyroscope |
| Measurement Range | Accelerometer ±3/±6/±12/±24 g; gyroscope ±125 to ±2000 dps |
| Digital Interface | I2C and SPI with four digital interrupt pins |
| Supply Voltage | VDD 2.4 V to 3.6 V; VDDIO 1.2 V to 3.6 V |
| Output Data Rate | 12.5 Hz to 2 kHz |
| Typical Current | 5.15 mA in full operation |
Package and Ordering Notes
The listed package is 16-pin LGA, 3.0 mm x 4.5 mm x 0.95 mm with 16 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Bosch Sensortec as Production at the verification date.
Sourcing Guidance
Use the exact model BMI088 and Bosch sales part number 0 273 141 365. Confirm label traceability, date code, reel format, factory lifecycle and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Bosch Sensortec documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
BMI088 FAQ
What is BMI088?
BMI088 is a Bosch Sensortec high-performance 6-axis inertial measurement unit optimized for vibration-rich drone and robotics applications. Bosch identifies the device with sales part number 0 273 141 365.
What are the main specifications of BMI088?
Sensor Axes is 3-axis accelerometer plus 3-axis gyroscope, and Measurement Range is Accelerometer ±3/±6/±12/±24 g; gyroscope ±125 to ±2000 dps. Use the linked Bosch datasheet for revision-controlled limits and test conditions.
What package does BMI088 use?
BMI088 is supplied in 16-pin LGA, 3.0 mm x 4.5 mm x 0.95 mm with 16 contacts. Match the Bosch land pattern and tape orientation before PCB or procurement approval.
Is BMI088 still in production?
BMI088 was present on Bosch Sensortec’s current product page and official download catalog when checked on 2026-07-29, so this record uses Production status. Confirm the current factory status and lead time when placing an order.
Which ordering details should be checked for BMI088?
Quote the model BMI088 together with Bosch sales part number 0 273 141 365. Also confirm reel quantity, label traceability, date code, package marking and the datasheet revision before accepting material.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Use the exact model BMI088 and Bosch sales part number 0 273 141 365. Confirm label traceability, date code, reel format, factory lifecycle and datasheet revision before ordering.