BMI270
smart low-power 6-axis inertial measurement unit with wearable, hearable and activity-recognition features
Key details
| Part Number | BMI270 |
|---|---|
| Manufacturer | Bosch Sensortec |
| Category | Inertial Measurement Unit |
| Lifecycle Status | Production |
| Series | BMI270 |
| Package / Case | 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm |
| Pin Count | 14 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-29 |
Part information
BMI270 Overview
BMI270 is a Bosch Sensortec smart low-power 6-axis inertial measurement unit with wearable, hearable and activity-recognition features supplied in 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Bosch Sales Part Number | 0 273 017 008 |
|---|---|
| Bosch Datasheet Document | BST-BMI270-DS000-08 |
| Sensor Axes | 3-axis accelerometer plus 3-axis gyroscope |
| Measurement Range | Accelerometer ±2/±4/±8/±16 g; gyroscope ±125 to ±2000 dps |
| Digital Interface | I2C, SPI, auxiliary sensor interface and OIS interface |
| Supply Voltage | VDD 1.71 V to 3.6 V; VDDIO 1.2 V to 3.6 V |
| Output Data Rate | Accelerometer up to 1.6 kHz; gyroscope up to 6.4 kHz |
| Typical Current | 685 µA at full ODR in aliasing-free operation |
Package and Ordering Notes
The listed package is 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm with 14 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Bosch Sensortec as Production at the verification date.
Sourcing Guidance
Use the exact model BMI270 and Bosch sales part number 0 273 017 008. Confirm label traceability, date code, reel format, factory lifecycle and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Bosch Sensortec documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
BMI270 FAQ
What is BMI270?
BMI270 is a Bosch Sensortec smart low-power 6-axis inertial measurement unit with wearable, hearable and activity-recognition features. Bosch identifies the device with sales part number 0 273 017 008.
What are the main specifications of BMI270?
Sensor Axes is 3-axis accelerometer plus 3-axis gyroscope, and Measurement Range is Accelerometer ±2/±4/±8/±16 g; gyroscope ±125 to ±2000 dps. Use the linked Bosch datasheet for revision-controlled limits and test conditions.
What package does BMI270 use?
BMI270 is supplied in 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm with 14 contacts. Match the Bosch land pattern and tape orientation before PCB or procurement approval.
Is BMI270 still in production?
BMI270 was present on Bosch Sensortec’s current product page and official download catalog when checked on 2026-07-29, so this record uses Production status. Confirm the current factory status and lead time when placing an order.
Which ordering details should be checked for BMI270?
Quote the model BMI270 together with Bosch sales part number 0 273 017 008. Also confirm reel quantity, label traceability, date code, package marking and the datasheet revision before accepting material.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Use the exact model BMI270 and Bosch sales part number 0 273 017 008. Confirm label traceability, date code, reel format, factory lifecycle and datasheet revision before ordering.