BMI323
general-purpose low-power 6-axis inertial measurement unit with integrated motion-triggered features
Key details
| Part Number | BMI323 |
|---|---|
| Manufacturer | Bosch Sensortec |
| Category | Inertial Measurement Unit |
| Lifecycle Status | Production |
| Series | BMI323 |
| Package / Case | 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm |
| Pin Count | 14 |
| Operating Temperature | -40°C to +85°C |
| Last Verified | 2026-07-29 |
Part information
BMI323 Overview
BMI323 is a Bosch Sensortec general-purpose low-power 6-axis inertial measurement unit with integrated motion-triggered features supplied in 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm. This page uses the exact orderable code because package, grade, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Bosch Sales Part Number | 0 273 017 028 |
|---|---|
| Bosch Datasheet Document | BST-BMI323-DS000-13 |
| Sensor Axes | 3-axis accelerometer plus 3-axis gyroscope |
| Measurement Range | Accelerometer ±2/±4/±8/±16 g; gyroscope ±125 to ±2000 dps |
| Digital Interface | I2C, I3C and SPI with two digital interrupt pins |
| Supply Voltage | VDD 1.71 V to 3.63 V; VDDIO 1.08 V to 3.63 V |
| Output Data Rate | Accelerometer and gyroscope up to 6.4 kHz |
| Typical Current | 790 µA in high-performance accelerometer-plus-gyroscope mode |
Package and Ordering Notes
The listed package is 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm with 14 pins, leads, lands or contacts. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The part or family is listed by Bosch Sensortec as Production at the verification date.
Sourcing Guidance
Use the exact model BMI323 and Bosch sales part number 0 273 017 028. Confirm label traceability, date code, reel format, factory lifecycle and datasheet revision before ordering.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Bosch Sensortec documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
BMI323 FAQ
What is BMI323?
BMI323 is a Bosch Sensortec general-purpose low-power 6-axis inertial measurement unit with integrated motion-triggered features. Bosch identifies the device with sales part number 0 273 017 028.
What are the main specifications of BMI323?
Sensor Axes is 3-axis accelerometer plus 3-axis gyroscope, and Measurement Range is Accelerometer ±2/±4/±8/±16 g; gyroscope ±125 to ±2000 dps. Use the linked Bosch datasheet for revision-controlled limits and test conditions.
What package does BMI323 use?
BMI323 is supplied in 14-pin LGA, 2.5 mm x 3.0 mm x 0.83 mm with 14 contacts. Match the Bosch land pattern and tape orientation before PCB or procurement approval.
Is BMI323 still in production?
BMI323 was present on Bosch Sensortec’s current product page and official download catalog when checked on 2026-07-29, so this record uses Production status. Confirm the current factory status and lead time when placing an order.
Which ordering details should be checked for BMI323?
Quote the model BMI323 together with Bosch sales part number 0 273 017 028. Also confirm reel quantity, label traceability, date code, package marking and the datasheet revision before accepting material.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
Use the exact model BMI323 and Bosch sales part number 0 273 017 028. Confirm label traceability, date code, reel format, factory lifecycle and datasheet revision before ordering.