MX30LF2G18AC-XKI
2Gb 3V x8 SLC NAND Flash requiring 4-bit ECC
Key details
| Part Number | MX30LF2G18AC-XKI |
|---|---|
| Manufacturer | Macronix |
| Category | SLC NAND Flash |
| Lifecycle Status | Production |
| Series | MX30LF2G18AC |
| Package / Case | 63-VFBGA (9x11mm) |
| Pin Count | 63 |
| Operating Temperature | -40°C to +85°C (Industrial) |
| Last Verified | 2026-07-17 |
Part information
MX30LF2G18AC-XKI Overview
MX30LF2G18AC-XKI is a Macronix 2Gb 3V x8 SLC NAND Flash requiring 4-bit ECC supplied in 63-VFBGA (9x11mm). This page uses the exact orderable code because package, speed, temperature and option suffixes can change compatibility.
Key Technical Specifications
| Memory Density | 2Gb |
|---|---|
| Cell Type | SLC NAND |
| Interface | Parallel NAND, x8 |
| Supply Voltage | 2.7V to 3.6V |
| Page Size | 2KB |
| ECC Requirement | 4-bit ECC |
| Sequential Read | 20ns |
| Package | 63-VFBGA, 9x11mm |
| Temperature Grade | Industrial, -40°C to +85°C |
Package and Ordering Notes
The listed package is 63-VFBGA (9x11mm) with 63 pins/lands/balls. The featured image is a generic package illustration for form-factor identification and is not an actual date-code or lot photograph. The family is listed by Macronix as Production at the verification date.
Sourcing Guidance
The XK code is a 9x11mm 63-VFBGA. Confirm the host provides at least 4-bit ECC per 512 bytes, and review NAND geometry, bad-block management and BGA ball map.
For an accurate quotation, include the full MPN, target quantity, acceptable date-code range, packaging format and destination. Icearth can help review traceability documents, label photos and electrical/package alignment before order placement.
Manufacturer Documentation
Technical values were checked against Macronix documentation. Use the linked datasheet as the controlling source and re-check revisions before PCB release or firmware qualification.
MX30LF2G18AC-XKI selection and design context
MX30LF2G18AC-XKI is cataloged as a SLC NAND Flash in the MX30LF2G18AC family. Its recorded function is 2Gb 3V x8 SLC NAND Flash requiring 4-bit ECC. Selection should be based on the complete electrical limits, package drawing and ordering suffix rather than the abbreviated family code.
- Memory Density: 2Gb. Confirm address organization, software support and required usable capacity.
- Cell Type: SLC NAND. Confirm the value and its datasheet test conditions for the exact ordering suffix.
- Interface: Parallel NAND, x8. Confirm logic levels, signaling mode, host support and required external components.
- Supply Voltage: 2.7V to 3.6V. Check rail compatibility, tolerance and sequencing under worst-case conditions.
Application and qualification considerations
When evaluating this memory device, confirm density, organization, interface mode, supply rails, access or clock timing, erase endurance and software command compatibility. For a new design, review power-up behavior, interface timing, absolute maximum ratings, thermal limits and any external-component requirements in the latest manufacturer documentation. Existing-board replacement work should additionally confirm pinout, footprint, firmware assumptions and qualification grade.
Procurement checks for MX30LF2G18AC-XKI
The recorded package is 63-VFBGA (9x11mm), the temperature range is -40°C to +85°C (Industrial), and the lifecycle status is Production as of 20260717. Before ordering, confirm the exact MPN on the label, packing format, quantity, date-code requirements, traceability documents and current factory status.
MX30LF2G18AC-XKI FAQ
What distinguishes MX30LF2G18AC-XKI within the MX30LF2G18AC family?
MX30LF2G18AC-XKI is the exact orderable code for a 2Gb 3V x8 SLC NAND Flash requiring 4-bit ECC in 63-VFBGA (9x11mm). Related MX30LF2G18AC devices may change package, rating, interface option or qualification grade, so compare the manufacturer ordering table before substitution.
What package and footprint checks are required for MX30LF2G18AC-XKI?
MX30LF2G18AC-XKI is recorded in 63-VFBGA (9x11mm) with 63 pins, leads or contacts. Confirm the manufacturer package drawing, dimensions, pin numbering, exposed-pad requirements and packing suffix before releasing a PCB footprint.
Which specifications should be verified when selecting MX30LF2G18AC-XKI?
Memory Density is recorded as 2Gb, Cell Type is recorded as SLC NAND. Use the latest datasheet for minimum and maximum limits, test conditions, timing and absolute maximum ratings rather than relying only on a distributor summary.
What is the lifecycle status of MX30LF2G18AC-XKI?
MX30LF2G18AC-XKI was recorded as Production when verified on 20260717. Reconfirm factory status, revision availability, lead time and any last-time-buy notice before design-in or volume procurement.
What information should be included in an RFQ for MX30LF2G18AC-XKI?
Provide the complete MX30LF2G18AC-XKI orderable code, target quantity, acceptable date-code range, required packing method, delivery destination and documentation needs. For replacement work, also identify the existing package and any mandatory qualification grade.
Lifecycle and sourcing review
Lifecycle information is shown for reference. Confirm current manufacturer documentation, availability and technical suitability before purchase.
The XK code is a 9x11mm 63-VFBGA. Confirm the host provides at least 4-bit ECC per 512 bytes, and review NAND geometry, bad-block management and BGA ball map.
Potential alternative part numbers
Verify package, pinout, voltage, firmware behavior and qualification before substitution.